75Additional informationThis section describes how to solve common problems you may encounter when usingyour CLIÉ™ handheld with the car cradle.MaintenanceFuse replacementIf the car cradle does not function correctly when connected to the car batteryadapter, make sure that the fuse in the car battery adapter has not burned out.If it has burned out, replace the fuse by the following procedures.1 Pull the car battery adapter out of the cigarette lightersocket.2 Detach the end of the plug by turning it anticlockwise.3 Replace the fuse with a new (identical rating) one.4 Reattach the end of the plug by firmly turning itclockwise.Notes• When replacing the fuse, use one of the correct amperage, as stated on the fusecase. (2.5 A, 125 V DC, approx. 30 mm)• Do not replace the fuse with a wire.• If the replaced fuse immediately burns out again, consult your car dealer.FuseCigarette lighter plug End ofthe plugto removeto tightenContinued on next page• • • • • • • • • • • • • • • • • • • • •