Revolabs FusionTM Microphone System — Sony PCS-G70 Setup GuideThis setup guide will guide you through the steps needed to properly connect aRevolabs Fusion Microphone System to a Sony PCS-G70 video codec.Note:It is important to carefully follow these instructions in order and completely.Otherwise your Fusion Microphone System and/or the video codec may not functionproperly. Please read through these instructions completely before proceeding.Contact Revolabs technical support if you have any questions.Requirements for connecting systems:1. Revolabs Fusion 4 or 8 channel Microphone System2. Sony PCS-G70 video codec3. QTY 1 Female XLR—1/8” mono male cable* (i.e. Calrad 10-144)4. QTY 1 RCA male — RCA male cable5. Amplified Speakers* Optional Item