Sony PCS-1 InstallationNOTE: Requires special adapter cable - XLR Female to 3.5 mm mini connector.Step 1Step 21.Plug the red RCA connector on one end ofCable Cinto Sony video-station notMIXED), and thenplug the red RCA connector on the other end into the Fusion Base Station .2.Plug one XLR connector ofCable D, XLR to XLR, into XLR Female to 3.5mm adapter cable and then to the Sonyvideo-station and the other XLR connector into the Fusion Base Station Mic Level Output .To configure the Sony PCS-1::Select theAudiosettings drop down menu.Confirm or modify the following settings:•Input Select - MIC•MIC Select – MIC•Echo Canceller - OFF•CTE – OFFPressSAVEto save changes.Sony PCS-G50 or G70 InstallationNOTE: Requires special adapter cable - XLR Female to 3.5 mm mini connector.Step 1Step 23.Plug the red RCA connector on one end ofCable Cinto Sony video-station RCA connector on the other end into the Fusion Base Station .4.Plug one XLR connector ofCable D, XLR to XLR, into XLR Female to 3.5mm adapter cable and then to the Sonyvideo-station and the other XLR connector into the Fusion Base Station Mic Level Output .