Menu
Sony NU-IP40S Instructions For Use Manual
                                 |
15Parts IdentificationFront SYSTEM indicatorIndicates the status of the unit.For details, see “Indicators” (page 29).WARNINGIf the SYSTEM indicator is rapidly blinking orange, donot touch the unit. The unit may be hot due to a coolingmalfunction caused by a fan error or blocked ventilationholes, and touching the connectors may result in burns.Disconnect the DC connector, and wait for the unit tocool down sufficiently before touching it.Rear Equipotential grounding terminalUse this for equipotential grounding connections. SDI input/output connectors A to D (BNCtype)Input/output 3G/HD serial digital component signals.Notes Use SDI input/output connectors A when transmittingHD video. Multiple lines of HD video cannot be transmittedsimultaneously. MAIN and SUB network connectors (LC×2)Connect 10GBASE-SR-compatible OM3 or OM4 opticalfiber cables here. Remove the supplied covers beforeconnecting the optical fiber cables.Notes Attach the supplied covers when optical fiber cablesare not connected. Dust and particles can havenegative effects on communication. Be sure to cleanthe optical connectors periodically. Bending and pulling can damage the optical fibercables and connectors. Be sure to handle them withcare. RS-232C connector (9-pin D-sub)Control device connected to this connector remotely.For details, contact your local Sony representative. DC IN connectorConnect the 24 V DC power cable here.Use a Hosiden–manufactured connector to connect.Part no: TCP8927-53Power cable: For voltages above 60 V at max. The powercable’s rating must be more than 2 A.When using an AC adapter, use the AC-81MD (notsupplied) etc.Warning on power supply devicesFor the DC power supply, be sure to use the AC adapterthat is supplied or one that is recommended, or a devicethat complies with the IEC 60601-1 standard and isprotected by double insulation or reinforced insulation.Be sure to use a power supply device capable ofsupplying a voltage of 24 V and a current of 1 A or more.However, the device should not be capable of supplying240 VA for 60 seconds or more (10 A or less).Use of power supply devices other than the above mayresult in fire or electric shock.NCGND24 V DC1A |
Related manuals for Sony NU-IP40S
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved