Sony MX-650 Owner's Instruction Manual

Also see for MX-650: Service manual

Battery compartmentLogement des pilesBatteriefachNegative polarityPolarité négativeMinuspol~ (OSo0oSo5 +Good conditionBon état des pilesGuter ZustandHECKDepress/Appuyer/Driicken©©©© PLHOOH © HHH GH @O©OO®©®DC IN 12V Power adaptorAdaptateur d‘alimentationNetzgeratto AC outleta une prise du secteuran eine SteckdosePOWER SOURCESBATTERIES1. Remove the battery lid as illustrated and insert the batteries(eight, size “C” cells) into the battery compartment, with thenegative polarity (—) of the battery facing toward the battery lidspring.@ Refer to the battery polarity indication label attached on thebottom of the MX-650.2. Replace the battery lid.Battery lifeWhen the battery life is reduced to a certain degree, the tonequality of the mixing sounds will be degraded.Before starting a valuable mixing recording, check the batterycondition as follows:1. Turn on the POWER switch.2. Depress the BATT CHECK button. The right VU Meter willindicate the battery condition.If the meter does not remain within the black BATT line, replaceall 8 batteries.Sony super size “C” batteries (eight) will supply approx. 45hours of contiuous operation with the MX-650.(Turn off the POWER switch to avoid unnecessary battery con-sumption when the MX-650 is not to be used.)@ When the mixer is not to be used for a long period of time or isoperated on house current, remove the batteries to avoid batteryleakage.@ Use fresh batteries. If possible, test the battery condition beforepurchasing.@ Keep the batteries in a cool place.AC HOUSE CURRENTUse the Sony AC Power Adaptor AC-12 (optional).When the power adaptor is connected, battery power is automati-cally disconnected. For detailed operation of the adaptor, refer toits instruction manual.@ Remove the batteries to avoid battery leakage when the adaptoris to be used for a long time.@ Disconnect the adaptor when the MX-650 is not in use.NoteThe POWER switch will be automatically turned off when the lidis closed, even with the POWER switch on.