To enhance your system, you can connect optional componems. Refbr to the operating instractionsprovided with each component. A North American model is used R)r illustration purpose.Optional analog component /1From the audio output jack of anoptional analog component[] AUDIO IN jackUse audio cord (not supplied) to connect anoptional analog component (Portable AudioPlayer, etc.) to this .jack. You can then record orlisten to the sound from the component throughthis system.NoteBcl\)rc connecting or discennccting the radio cord(not supplied), press VOLUME repeatedly (er turnthe VOLUME control on the unit ceutercleckwise) toturn dox_nthe ve]ul//e.Listening to audio from aconnected component1 Connect the audio cord (not supplied). See"Hooking up optional components".2 Press FUNCTION repeatedly (or AUDIO INon the unit) until "AUDIO IN" appears,3 Start playing the connected component.Recording audio fromconnected component1 Connect the audio cord (not supplied).2 Start recording manually. See "Recordingon a tape manually" on page 18.Notes• If the cennccted component has the AVLS(Automatic Velume Limiter System) functien, besure to turn off Ihe fimctien when using the AUDIOIN. Otherx_ise, you will have to turn up the volumeof the speaker, and that may cause distellien.• If the connected component has the BASS BOOSTor MEGA BASS function, be sure to turn off thefimction when using the AUDIO IN. Otherwise, thesound frem the speaker may be disterled.OOO3o27 GB