Sony MDR-EX86LP Operating Instructions Manual
Also see for CKM-NWS630BLK: Specifications
Contents |
StereoHeadphonesMDR-EX86LP4-209-718-11(1)Operating InstructionsManual de instruccionesEnglishStereo headphonesFeatures 13.5 mm dynamic type driver units reproduce vocal and instrumental sound withvivid clarity Reproduction of precision monitor quality by adapting the new structuralarrangement of 13.5 mm driver units while maintaining excellent wearing comfort Convenient cord adjuster supplied Hybrid silicone rubber earbuds (S, M, L) supplied for secure fitting and long-termwearing comfort (see fig. ) Convenient carrying pouch suppliedHow to useWearing the headphones (see fig. )1 Determine right and left headphone and hold them as in the illustration.2 Insert the left headphone from behind your left ear, as in the illustration. Besure to wear it completely inside the ear canal.3 Adjust the earbud to fit snugly in your ear. Follow the same procedure for theright side.How to use the supplied cord adjuster (see fig. )You can adjust the cord length by winding the cord on the cord adjuster.(The cord can be wound to the cord adjuster up to 50 cm (19 3/4 in). If you wind more,the cord comes off from the cord adjuster easily.)1 Wind the cord.2 Push cord into slot hole to secure in place.NoteDo not wind the plug or split section of the cord, as it will strain the cord and may cause a wire break.How to install the earbuds correctly (see fig. )If the earbuds do not fit your ears correctly, low-bass sound may not be heard. To enjoybetter sound quality, change the earbuds to another size, or adjust the earbuds position tosit on your ears comfortably and fit your ears snugly.If the earbuds do not fit your ears, try another size. Confirm the size of the earbuds bychecking color inside (see fig. -).When you change the earbuds, turn to install them firmly on the headphones to preventthe earbud from detaching and remaining in your ear.Earbud sizes (inside color)Small LargeSS*(Red)S(Orange)M(Green)L(Light blue)* This size is optional and available at purchase.To detach an earbud (see fig. -)While holding the headphone, twist and pull the earbud off. TipIf the earbud slips and cannot be detached, wrap it in a dry soft cloth.To attach an earbud (see fig. -)Push the parts inside of the earbud into the headphone until the projecting part of theheadphone is fully covered.Cleaning the earbudsRemove the earbuds from the headphones, and wash them with a mild detergentsolution.How to carry the headphones (see fig. )1 Place the headphones in the inner case.2 Wind the cord around the side of the inner case and then put the inner casein the carrying case.SpecificationsType: Closed, dynamicDriver unit: 13.5 mm (CCAW adopted), dome typePower handling capacity: 100 mW (IEC*)Impedance: 16 Ω at 1 kHzSensitivity: 105 dB/mWFrequency response: 5 – 24,000 HzCord: Approx. 1.2 m (47 1 /4 in), OFC litz cordMass: Approx. 6 g (0.21 oz) without cordPlug: Gold-plated L-shaped stereo mini plugSupplied accessoriesEarbuds (S (2), M (2), L (2))Carrying case (1)Inner case (1)Cord adjuster (1)Operating Instructions (1)* IEC = International Electrotechnical CommissionDesign and specifications are subject to change without notice.Precautions Please keep your headphones clean at all times especially inside the rubber earbud(see fig. ).If any dust or ear wax is inside the earbud, you may experience some listeningdifficulties. Listening with headphones at high volume may affect your hearing. For traffic safety,do not use while driving or cycling. Do not put weight or pressure on the headphones as it may cause the headphones todeform during long storage. The earbuds may deteriorate due to long-term storage or use. Install the earbuds firmly onto the headphones. If an earbud accidentally detaches andis left in your ear, it may cause injury.Note on static electricityIn particularly dry air conditions, mild tingling may be felt on your ears. This is a resultof static electricity accumulated in the body, and not a malfunction of the headphones.The effect can be minimized by wearing clothes made from natural materials.EP-EX10A is available (sold separately) as optional replacement earbuds.EP-EX10A offers 4 types of the earbuds: SS, S, M and L.©2010 Sony Corporation Printed in Thailand Cross-section of earbudLow-density siliconeHigh- density silicone2 31 Earbud12 Sectional ViewColored parts 1 2 |
Related manuals for Sony CKM-NWS630BLK
Sony MDR-EX76LP Operating Instructions Manual
Sony MDR-EX56LP Operating Instructions Manual
Sony MDR-EX80LP Operating Instructions Manual
Sony MDR-EX85LP Operating Instructions Manual
Sony MDR-EX85LP Operating Instructions Manual
Sony MDR-EX80 Operating Instructions Manual
Sony MDR-EX35LP Operating Instructions Manual
Sony MDR-EX10LP Operating Instructions Manual
Sony MDR-EX35LP Operating Instructions Manual
Sony MDR-EX15LP Operating Instructions Manual
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved