Sony MAV-555A Maintenance Manual

3-3 (E)MAV-555ABlank panel1. Raise the blank panel. (Refer to the “Ornamentalplate”.)2. Loosen the two coin head screws of the slider (LH)assembly and of the slider (RH) assembly by turningthem in the direction of arrows A and B. Remove theblank panel by moving it in the direction of arrow C.nWhen installing the blank panel back to the MAV-555A, raise the right end and the left end of the sliderassembly to the same height (three to four clicksupwards) and install the blank panel.Blank panelBlank panelSlider (RH)assemblySlider (LH)assemblyCoin head screwCoin head screwClawsACB Holes 90d to 180dLoosens TightensAdjustment screwAdjustmentscrewAdjustment screwAdjusting the force to open and close the blank panelThe blank panel of the MAV-555A is equipped with theadjustment screws in its right end and left end that deter-mine force to open and close the blank panel. Turing theadjustment screws clockwise increases the force andturning them counter-clockwise reduces the force. Thescrews can be rotated in the range of 90d to 180d. Adjustthe force as desired.nDo not open or close the blank panel with the adjustmentscrews rotated fully clockwise.3-2. Removing the Cabinet