Sony LSPX-102E26 Reference Manual

Also see for LSPX-102E26: Help guide

English LED Bulb SpeakerBefore operating the system, please read this guide thoroughly and retain itfor future reference.Owner’s RecordThe serial number is located on the screw base.Record the serial number in the space provided below. Refer to themwhenever you call upon your Sony dealer regarding this product.Model No. LSPX-102E26Serial No.WARNINGTo reduce the risk of fire or electric shock, do not expose thisapparatus to rain or moisture.To reduce the risk of fire, do not cover the bulb region of the appliance withnewspapers, tablecloths, curtains, etc. Do not expose the appliance to nakedflame sources (for example, lighted candles).To reduce the risk of fire or electric shock, do not expose this apparatus todripping or splashing, and do not place objects filled with liquids, such asvases, on the apparatus.The unit is not disconnected from the AC power source (mains) as long as it isconnected to the wall outlet, even if the unit itself has been turned off.FOR SAFETYADDED WEIGHT OF THE DEVICE MAY CAUSE INSTABILITY OF A FREE STANDINGPORTABLE LUMINAIRE.USE ONLY WITH A PORTABLE TABLE LAMP THAT IS PROVIDED WITH A SHADE.THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS.This device is not intended for use with light fixtures that havea dimming feature, emergency lights, exit lights, or HID lampfixtures (mercury lamps, etc.).Doing so may cause smoke, circuit damage, or other damage.Some other types of light fixtures may not be usable, depending on the size,heat conditions, and other circumstances.CAUTIONDanger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent type.Do not expose batteries or appliances with battery installed to excessiveheat, such as sunshine and fire.WARNING• DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD• The remote control supplied with this product contains a coin/button cellbattery. If the coin/button cell battery is swallowed, it can cause severeinternal burns in just 2 hours and can lead to death.• Keep new and used batteries away from children. If the batterycompartment does not close securely, stop using the product and keep itaway from children.• If you think batteries might have been swallowed or placed inside any partof the body, seek immediate medical attention.CAUTIONThe following FCC/IC statement applies only to the version of thismodel manufactured for sale in the USA and Canada. Other versionsmay not comply with FCC/IC technical regulations.Changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.NOTE:This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one ormore of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.The transmitter must not be co-located or operated in conjunction with anyother antenna or transmitter.This equipment complies with FCC/IC radiation exposure limits set forth for anuncontrolled environment and meets the FCC radio frequency (RF) ExposureGuidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. Thisequipment should be installed and operated keeping the radiator at least20 cm or more away from person’s body.This device complies with Part 15 of FCC Rules and Industry Canada’slicense-exempt RSSs. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may causeundesired operation.For customers in the USA and CanadaFor the state of California, USA onlyPerchlorate Material - special handling may apply, Seewww.dtsc.ca.gov/hazardouswaste/perchloratePerchlorate Material : Lithium battery contains perchloratePrecautionsNote when using with a mobile phone• For details on operation of your mobile phone when receiving a telephonecall while transmitting the sound using the BLUETOOTH connection, refer tothe operating instructions supplied with the mobile phone.On temperature rise• If the product is used for an extended period of time, the temperature of theproduct will rise. This is not a malfunction.On placement• Do not leave the speaker in a location near heat sources, in a place subjectto direct sunlight, excessive dust, moisture, rain, or mechanical shock.• Do not leave any objects susceptible to magnetism (cash cards, floppy diskswith magnetic coding, etc.) near the speaker.• Do not splash water onto this product. The product is not waterproof.Take special care in the following situations:– In the washroom, bathroom, or any other place where the product is atrisk of getting wet– In areas subject to rain, snow, or high humidity• If turned on near a radio, TV, or other audio or visual device, there may benoise. (When there is noise, separate the lamp from the other device by atleast 1 meter.)• If turned on near a device (TV, air conditioner, etc.) that uses an infraredremote control, the remote control may not work properly.• Avoid using the product in places where sulfur is prevalent (such as a hotspring). Doing so can cause the optical qualities to malfunction.On cleaning• Do not use alcohol, benzine, or thinner to clean the product.On handling• Do not rinse, dismantle, or modify the product. The LED component cannotbe replaced.• Use in a location with an ambient temperature of 5 °C to 40 °C (41 °F to104 °F).• If the product is installed in a fixture that is enclosed or if the area in oraround the fixture heats up, the service life of the product will shorten, andthe brightness may automatically lower to reduce power.• Before operating the system, be sure that the operating voltage of thesystem is identical with that of your local power supply.• Do not stare into the light for extended periods of time. Doing so maynegatively affect your eyes.• Do not press against or cause impact to the speaker section of the mainunit.Others• Because the brightness and the light color of the LED component may vary,the brightness and light color of two products may be different, even if theyare the same type.• The brightness, light color, central light intensity, and distribution of light(distribution of luminous intensity) are not the same as for an incandescentlight bulb.• The amount of time that it takes for the light to turn on and off may beslower than for a regular light bulb.• The product may not work in conjunction with motion sensor switches andother automatic light switches and off timers.• Before installation and use of the product, confirm that the light fixture hasnot deteriorated.• The sound quality of the speaker depends on the type, shape, and locationof the light fixture.On Copyrights• The BLUETOOTH® word mark and logos are owned by the Bluetooth SIG,Inc. and any use of such marks by Sony Corporation is under license.• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks ofApple Inc., registered in the U.S. and other countries.• “Made for iPod” and “Made for iPhone” mean that an electronic accessoryhas been designed to connect specifically to iPod or iPhone respectively,and has been certified by the developer to meet Apple performancestandards. Apple is not responsible for the operation of this device or itscompliance with safety and regulatory standards. Please note that the useof this accessory with iPod or iPhone may affect wireless performance.• Google Play™ and Android™ are trademarks of Google Inc.• Other trademarks and trade names are those of their respective owners.What is BLUETOOTH wirelesstechnology?BLUETOOTH wireless technology is a short-range wireless technology thatenables wireless data communication between digital devices, such as acomputer and digital camera. BLUETOOTH wireless technology operates withina range of about 10 m.You do not need to use a cable for connection, nor is it necessary for thedevices to face one another, such is the case with infrared technology. Forexample, you can use such a device in a bag or pocket.BLUETOOTH standard is an international standard supported by thousands ofcompanies all over the world, and employed by various companies worldwide.Maximum communication rangeMaximum communication range may shorten under the following conditions.– There is an obstacle such as a person, metal, or wall between the systemand BLUETOOTH device.– A wireless LAN device is in use near the system.– A microwave oven is in use near the system.– A device that generates electromagnetic radiation is in use near thesystem.– The transmitter is connected to other BLUETOOTH devices.Interference from other devicesBecause BLUETOOTH devices and wireless LAN (IEEE802.11b/g/n) use thesame frequency, microwave interference may occur and resulting incommunication speed deterioration, noise, or invalid connection if the systemis used near a wireless LAN device. In such a case, perform the following.– Use the system at least 10 m away from the wireless LAN device.– If the system is used within 10 m of a wireless LAN device, turn off thewireless LAN device.Interference to other devicesMicrowaves emitting from a BLUETOOTH device may affect the operation ofelectronic medical devices. Turn off the system and other BLUETOOTH devicesin the following locations, as it may cause an accident.– where inflammable gas is present, in a hospital, train, airplane, or a gasstation– near automatic doors or a fire alarmNotes• To be able to use the BLUETOOTH function, the BLUETOOTH device to beconnected requires the same profile as the system’s.Note also that even if the same profile exists, devices may vary in functiondepending on their specifications.• Due to the characteristic of BLUETOOTH wireless technology, the soundplayed on the system is slightly delayed from the sound played on theBLUETOOTH device during music playback. Particularly when receivingsound for a video, the sound may be later than the visual.• This system supports security capabilities that comply with the BLUETOOTHstandard to provide a secure connection when the BLUETOOTH wirelesstechnology is used, but security may not be enough depending on thesetting. Be careful when communicating using BLUETOOTH wirelesstechnology.• We do not take any responsibility for the leakage of information duringBLUETOOTH communication.• A device featuring the BLUETOOTH function is required to conform to theBLUETOOTH standard specified by Bluetooth SIG, and be authenticated.Even if the connected device conforms to the above mentioned BLUETOOTHstandard, some devices may not be connected or work correctly, dependingon the features or specifications of the device.• Noise or sound skips may occur depending on the BLUETOOTH deviceconnected with the system, the communication environment or the usageenvironment.SpecificationsLED sectionTotal flux 500 lumensPower consumption 8.6 WLight color Warm white (2700K)Screw base E26 type screw baseDistribution of luminous intensitySemi-omni distributionSpeaker sectionSpeaker system Approx. 40 mm (1.6 in) dia.BLUETOOTHCommunication SystemBLUETOOTH Specification version 4.1Output BLUETOOTH Specification Power Class 1Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz)Modulation method FHSSCompatible BLUETOOTH Profiles*1A2DP (Advanced Audio Distribution Profile)AVRCP (Audio Video Remote Control Profile)Supported Codecs* 2 SBC* 3, AACContent protection SCMS-T methodTransmission range (A2DP)20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)*1 BLUETOOTH standard profiles indicate the purpose of BLUETOOTHcommunication between devices.*2 Codec: Audio signal compression and conversion format*3 Subband CodecGeneralPower AC 120 V 60 HzOperating environment and temperatureIndoor at 5 °C to 40 °C (41 °F to 104 °F)Dimensions (including projecting parts)Approx. 61 mm dia. × 116 mm (2.4 in dia. × 4.6 in)Mass Approx. 198 g (7 oz)Supplied accessoriesRemote control (1)Lithium battery for remote control (CR2032,pre-installed, for testing) (1)Startup Guide (1)Reference Guide (this document) (1)Warranty card (1)iPhone/iPod models that can use SongPal withthis productCompatible model BLUETOOTH®iPhone 6s Plus iPhone 6s iPhone 6 Plus iPhone 6 iPhone 5s iPhone 5c iPhone 5 iPhone 4s iPod touch (6th generation) iPod touch (5th generation) as of April 2016SongPal is compatible with iPhone and iPod touch only.Design and specifications are subject to change without notice.LED Bulb SpeakerLSPX-102E26©2016 Sony Corporation Printed in Japanhttp://www.sony.net/4-579-895-13(1)Reference GuideGuide de référence

/ 2

Related manuals for Sony LSPX-102E26