© 2004 Sony Corporation Printed in Japan 0-530-700-01 (1)EnglishNotice of changes due to version upgradeIn order to provide our customers better features, we have made a provisional version upgrade to the LocationFree TVsoftware. Due to this upgrade, some sections of the Operating Instructions have changed. The specific changes to yourLocationFree TV due to this version upgrade are described in greater detail below.x Changes to keyboard key namesIn response to customer feedback, the “Close” key (LF-X1) or the “Exit” key (LF-X5) on the on-screen keyboard has beenrenamed the “Enter” key, as shown below. The function of the key is not changed.LF-X1/LF-X5x Changes to NetAV setupIn consideration of the convenience of customers who use the NetAV function, we have added support for automatic routerconfiguration (UPnP).As a result of this change, please replace the screenshot and operations described in step 4 on page 56 of the OperatingInstructions with those shown below.4 Configure the necessary settings for each item and select [OK].1 Select [Enable].2 If necessary, change the port number of the NetAV server.3 Select [Enable], if the settings for your router can beautomatically configured by UPnP (Universal Plug and Play).4 Select [OK].z Tips• When [OK] is selected, changes to the settings are updated.If [Automatic Router Configuration (UPnP)] is enabled, the routerstatus is displayed after the settings are updated. Selecting [Update]then displays the most recent router status.• For [Port number for the NetAV], enter a number between 5021 and5999.• Some routers with UPnP functionality cannot be used until thisoption is turned on from the router’s configuration menu. For moredetails, refer to your router’s operating instructions.NoteConfigure the settings while the base station and monitor are connectedin Home-Wireless mode.The [NetAV Settings] window reappears.1234