– 15 –KDF-E42/50A11ERM-ED00234 GBDisplays the “Digital Set Up” menu. You can change/set the digital settings using this menu.1 Press OK to select “Digital Set Up”.2 Press m/M to select the desired icon below, then press OK.3 Press m/M to select one of the following options, then press OK.Digital Set UpProgramme List EditDigital Manual TuningDigital Auto TuningDigital TuningExit:Enter:Select: OK MENUDigital Tuning menuOption DescriptionDigital Tuning Tunes in all the available digital channels.Usually you do not need to do this operation because the channelsare already tuned when the TV was first installed (page 13).However, this option allows you to repeat the process (e.g., toretune the TV after moving house, or to search for new channelsthat have been launched by broadcasters).1 Press OK to start digital auto-tuning.When all available digital channels have been tuned, a messagestating that the auto-tuning process is finished appears.2 Press < .Digital AutoTuningProgrammeList EditRemoves any unwanted digital channels stored on the TV, andchanges the order of the digital channels stored on the TV.1 Press m/M to select the channel you want to removeor move to a new position.If you know the channel number (frequency)Press the number buttons to enter the three-digit programmenumber of the broadcast you want.To display the previous or next five channelsPress the red button (previous) or the green button (next).2 Remove or change the order of the digital channels asfollows:To remove the digital channelPress OK. A message that confirms whether the selecteddigital channel is to be deleted appears. Press < to select“Yes”, then press OK.To change the order of the digital channelsPress ,, then press m/M to select the new position for thechannel and press OK. Repeat the procedure in step 2 tomove other channels if required.3 Press <.Tipfunctions are available only for DVB countries (page 2)35 GBUsing the MenuOption DescriptionDigital ManualTuningTunes the digital channels manually.1 Press the number button to select the channel numberyou want to manually tune, then press m/M to tune thechannel.2 When the available channels are found, press m/M toselect the channel you want to store, then press OK.To display the previous or next five channelsPress the red button (previous) or the green button (next).3 Press m/M to select the programme number whereyou want to store the new channel, then press OK.Repeat the procedure above to tune other channels manually.Digital Set-up Displays digital subtitles on the screen.Press m/M to select “Off”, “Basic”, or “For Hard of Hearing”, thenpress OK.When “For hard of hearing” is selected, some visual aids may alsobe displayed with the subtitles (if TV channels broadcast suchinformation).Subtitle SettingSubtitleLanguageSelects which language subtitles are displayed in.Press m/M to select the language, then press OK.AudioLanguageSelects the language used for a programme. Some digital channelsmay broadcast several audio languages for a programme.Press m/M to select the audio language, then press OK.Audio Type Increases the sound level (only for Hard of Hearing).Press m/M to select “Basic” or “For Hard of Hearing”, then pressOK.Parental Lock Sets an age restriction for programmes. Any programme thatexceeds the age restriction can only be watched after a PIN Code isentered correctly.1 Press the number buttons to enter your existing PINcode.If you have not previously set a PIN, a message appears toinform you. Press OK, then follow the instruction of “PIN code”below.2 Press m/M to select the age restriction or “None” (forunrestricted watching), then press OK.3 Press <.