Sony JumboTron JTC-C200 Service Manual

Also see for JumboTron JTC-C200: Operating instructions

1-17(E)JTC-C20032 OthersINPUT-2 Analog RGB inputs: BNCconnector (5)R: 0.7 Vp-p ± 2 dB, positive, 75ohms, terminatedG: 0.7 Vp-p ± 2 dB, positive, 75ohms terminatedG with sync: 1 Vp-p ± 2 dB, syncnegative, 75 ohms terminatedB: 0.7 Vp-p ± 2 dB, positive, 75ohms terminatedHD/COMP:Composite sync input:1 – 3.5 Vp-p, sync positive/negative, 75 ohms terminatedHorizontal sync input:1 – 3.5 Vp-p, sync positive/negative, 75 ohms terminatedVD:Vertical sync input: 1 – 3.5 Vp-p,sync positive/negative, 75 ohmsterminatedOutput SIGNAL OUT: High-density D-sub15-pin (48)VIDEO OUT: BNC connector (1),1 Vp-p ± 2 dB, sync negative, 75ohms terminatedMONITOR OUT: BNC connector(1), 1 Vp-p ± 2 dB, sync negative,75 ohms terminatedControl CONTROL 1/LS, CONTROL 2,CONTROL 3, CONTROL 4:D-sub 15-pin for RS-422 (4)EXTERNAL CONTROL: D-sub15-pin (1)Supplied accessoriesRail mounting bracket (4)AC power cord (3)Operation Guide (1)SpecificationsJTC-P200 ICUGeneralPower requirementsAC 100 – 240 V, 50/60 Hz, 1.4 APower consumption140 W (max.)Dimensions 482 × 177 × 486 mm (w/h/d)(19 × 7 × 191 /4 inches)Mass Approx.15.8 kg (34 lb 13 oz)Operating conditionsTemperature: 0°C to 45°C (32°F to113°F)Humidity: 30% to 70% (nocondensation)Signal cable length100 m (328 feet) max.Input/outputInputINPUT-1 Composite video input: BNCconnector (1), 1 Vp-p ± 2 dB,sync negative, 75 ohmsterminatedAnalog RGB/component inputs:BNC connector (5)R/R-Y: 0.7 Vp-p ± 2 dB, positive,75 ohms terminatedG/Y: 0.7 Vp-p ± 2 dB, positive,75 ohms terminatedG with sync/Y: 1 Vp-p ± 2 dB,sync negative, 75 ohmsterminatedB/B-Y: 0.7 Vp-p ± 2 dB, positive,75 ohms terminatedHD/COMP:Composite sync input:1 – 3.5 Vp-p, sync positive/negative, 75 ohms terminatedHorizontal sync input:1 – 3.5 Vp-p, sync positive/negative, 75 ohms terminatedVD:Vertical sync input: 1 – 3.5 Vp-p,sync positive/negative, 75 ohmsterminatedOthers 33JTC-C200 ICU controllerGeneralPower requirementsAC 100 – 240 V, 50/60 Hz, 0.13 APower consumption13 W (max.)Dimensions 481 × 132.4 × 228 mm (w/h/d)(19 × 5 1/ 4 × 9 inches)Mass Approx. 5 kg (11 lb)Operating conditionsTemperature: 0°C to 45°C (32°F to113°F)Humidity: 30% to 70% (nocondensation)Input/outputControl CONTROL 1, CONTROL 2:D-sub 15-pin for RS-422 (2)EXTERNAL CONTROL: D-sub15-pin (1)COM 1, COM 2: D-sub 9-pin (2)Supplied accessoriesAC power cord (3)Operating Instructions (1)Pin assignmentCONTROL 1 and CONTROL 2 connectors (D-sub15-pin)Pin No. Signal Pin No. Signal1 GND 9 TXD –2 TXD + 10 RTS –3 RTS + 11 RXD –4 RXD + 12 CTS –5 CTS + 13 DSR –6 DSR + 14 DTR –7 DTR + 15 Not used8 GNDPin assignmentEXTERNAL CONTROL connector (D-sub 15-pin)Pin No. Signal Pin No. Signal1 FRAME GROUND 9 JT POWER –2 JT POWER + 10 UTILITY –3 UTILITY + 11 Reserved 1 –4 Reserved 1 + 12 Reserved 2 –5 Reserved 2 + 13 Reserved 3 –6 Reserved 3 + 14 Reserved 4 –7 Reserved 4 + 15 Reserved 5 –8 Reserved 5 +Design and specifications are subject to changewithout notice.