Sony IPELA PCS-G70 Manual

Also see for IPELA PCS-G70: Operating instructions Function guide Frequently asked questions System integration guide Operation manual

3-869-384-14 (1)© 2005 Sony Corporation Printed in JapanVideo Communication System PCS-G70/G70PConnection Sheet (LAN Connection)System Setup3 Connect the camera.Connect the Camera Unit and CommunicationTerminal using the supplied camera cable.4 Connect the Data Solution Box.Connect the Data Solution Box and Communication Terminalusing the cable supplied with the Data Solution Box.5 Connect the LAN cable.Connect the Communication Terminal to aLAN using a LAN cable (not supplied).1TV monitor** 3Camera UnitCommunication TerminalPCS-PG70/PG70P4Data Solution BoxPCSA-DSB1S**5LAN cable**6AC adaptorPower cord*LAN1 Connect the TV monitor.Connect the TV monitor and Communication Terminalusing the supplied audio cable and S-video cable.• When connecting a second or thirdmonitor, use the VIDEO OUTMONITOR 2 or the RGB OUTconnector on the CommunicationTerminal, or the RGB OUTconnector on the Data SolutionBox. For details, refer to theOperating Instructions.• The AUDIO OUT (MIXED) jack isused to make an audio recording ofa conference. This is not usedduring regular conferences.When using only one camera, connect it to theMAIN CAMERA connector. A second camera canbe connected to the SUB CAMERA connector.6 Connect the AC adaptor.Connect the supplied AC adaptor to theCommunication Terminal, and then plug thepower cord into a wall outlet.AC adaptor*to a wall outlet (120V AC)Power cord*PCSA-CG70/CG70P**Let’s connectUsed with the Data Solution Box for the first time, theCommunication Terminal may automatically upgrade the software ofthe Data Solution Box. While the upgrading message is displayed onthe monitor screen, be sure not to turn off the CommunicationTerminal. Doing so may cause malfunction of the system.Interface cable (supplied withthe PCSA-DSB1S)Camera cable(supplied with theCamera Unit)UTP cable(category 5, straight)*** supplied** not supplied• Be sure to turn off all the equipmentbefore making any connections.• Do not connect/disconnect the cameracable with the power on. Doing so maydamage the Camera Unit orCommunication Terminal.* suppliedCommunicationTerminal** not supplied * suppliedNotesS-VIDEO INAUDIO INL RS-video cable*Audio cable*TV monitorCommunicationTerminalFor safety, do not connect the 100BASE-TX/10BASE-Tconnector to a network that applies an excess voltagevia the 100BASE-TX/10BASE-T connector.“IPELA” and are trademarks of Sony Corporation.2MicrophonePCS-A1**CommunicationTerminalCommunicationTerminalto LANData Solution BoxCommunicationTerminalCamera Unit2 Connect themicrophone.Connect the microphone cableto Communication Terminal.CommunicationTerminalMicrophone• For connection examples using the Remote ControlReceiver and Plug adaptor, refer to the OperatingInstructions on the supplied CD-ROM.• Both the Remote Control Receiver and the Camera Unitcan receive signals from the Remote Controller. Whenboth are connected at the same time, the Remote ControlReceiver receives the Remote Controller signals.Plug adaptor*Remote ControlReceiver*VGP-AC19V45 orVGP-AC19V15*

/ 2

Related manuals for Sony IPELA PCS-G70