47Recording/PlaybackPlaying the images on a TVConnect your camcorder to the input jack of a TV or VCR using the A/V connecting cable 1or an A/V connecting cable with S VIDEO 2. Connect your camcorder to the wall outlet (wallsocket) using the supplied AC Adaptor for this operation (p. 22). Refer also to the instructionmanuals supplied with the devices to be connected.1 A/V connecting cable (supplied)Connect to the input jack of the other device.2 A/V connecting cable with S VIDEO (soldseparately)When connecting to the other device via the SVIDEO jack, by using an A/V connecting cablewith S VIDEO (sold separately), higher qualityimages can be produced than with an A/Vconnecting cable. Connect the white and redplugs (left/right audio) and the S VIDEO plug(S VIDEO channel) of the A/V connectingcable with S VIDEO (sold separately). Theyellow plug connection is not necessary.Connecting only the S VIDEO plug will notoutput audio.When your TV is connected to a VCRConnect your camcorder to the LINE INinput on the VCR. Set the input selector onthe VCR to LINE (VIDEO 1, VIDEO 2, etc.),if the VCR has an input selector.To set the aspect ratio according tothe connected TV (16:9/4:3)Change the setting according to the screenaspect ratio of the TV you will view imageson.1 Turn on your camcorder.2 Touch (HOME) t (SETTINGS)t [OUTPUT SETTINGS] t [TV TYPE]t [16:9] or [4:3] t .: Signal flowA/V RemoteConnectorS VIDEOVIDEOAUDIO(Yellow)(White)(Red)VCRs or TVsINVIDEOAUDIO(White)(Red)INDevice withoutS VIDEO jackDevice withS VIDEO jackContinued ,
