Sony Handycam DCR-DVD101 Operating Instructions Manual

Contents

20Adjusting the angle and the brightness of the LCD screenAdjust the brightness and the angle of the LCD screen properly in your sight.1 Open the LCD screen.2 Adjust the direction of the LCD screen to the desired position.When you adjust the angle of the LCD screen, make sure if the LCD screen isopened up to a full 90 degrees.You can turn the LCD screen over and then fold it back to the camcorder bodywith the LCD screen facing out as shown below.To adjust the brightness of the LCD display1 Turn the power on by pressing the POWER button for a few seconds.2 Press SETUP.The SETUP display appears.3 Use the multi-selector to select (LCD/VF SET).Refer to page 23 to see how to use the multi-selector.Step 3 Adjusting the LCD screen and the viewfinder[ SETUP ] : ENDPROGRAM AEP EFFECTD EFFECTAUTO SHTRWHT BALMANUAL SET[ SETUP ] : ENDLCD BRIGHTLCD B. L.LCD COLORRETURNVF B. L.LCD / VF SET12LCD BACKLIGHTbutton 90°180°90°