Sony HT-DDW2500 Quick Setup Manual

Also see for HT-DDW2500: Operating instructions

Sony Corporation © 2009 Printed in Malaysia4-127-415-11(1)1: Installing the speakersHT-DDW2500Quick Setup Guide2: Connecting the speakers(1)10 mmA Speaker cord (supplied)ADVD/BDINDIGITALOPTICALSATINCOAXIALANTENNAAMSA-CD/CDLRTV SATSPEAKERSLRSUBWOOFERIN IN INFRONTAKERSLRFRONTSS-MSP2500 - SS-MSP2500 3DVD/BDINDIGITALOPTICALSATINCOAXIALANTENNAAMSA-CD/CDLRTV SATSPEAKERSLRSUBWOOFERIN IN INFRONTSPEASUBWOOFERSS-WP3000 SS-WP3000This Quick Setup Guide describes how to connect a DVD player or Blu-ray discplayer, satellite tuner or set-top box, TV, speakers and subwoofers so that you canenjoy surround sound. Refer to the operating instructions supplied with the receiverfor details.The illustrations in the guide designate speakers as  through . Front speaker (left) Front speaker (right) Subwoofer Subwoofer1: Installing the speakersThe illustration at left shows an example of two speakers and two subwoofersconfi guration. Refer to the operating instructions supplied with the receiver.About speaker placementThe front speakers, subwoofers are magnetically shielded to allow it to be installednear a TV set.2: Connecting the speakersThe illustrations below show how to connect the speakers. Before you connect thespeakers, check the speaker label on the rear panel of the speakers for the speaker type.For details, refer to step 2 of “Getting started” of the operating instructions supplied withthis receiver.About speaker cords• Black striped wire is minus (–) in polarity and should be connected to the minus (–)speaker terminal.About speaker jacks• Connect the  jack to the  jack of the receiver and connect the  jack to the  jackof the receiver.• Refer to the illustration below for details of connecting speaker cords.A

/ 2

Related manuals for Sony HT-DDW2500