Menu
Sony HS-MB1 Service Manual
                                                          |
SERVICE MANUALSony CorporationAudio&Video Business GroupPublished by Sony Techno Create CorporationHS-MB1DISTRIBUTION PANEL9-889-410-012009B04-1© 2009.02US ModelVer. 1.0 2009.02SPECIFICATIONSInput and output terminalsRJ45: T568B Terminated. ABE (only for connection to HS-KP1(Keypad))(A DC 19.5 V included)CD (only for connection to HS-WV1(AV Wall Port))(C DC 19.5 V included)F (only for connection to CAV-CVB1(Component Video Balun))(DC 10 V included)GH (only for connection to HS-WD1(DIGITAL MEDIA Wall Port))(G DC 19.5 V included)40 pin flat terminals: For IDE cable (with pin 20 opening) only(For stack connection only)Pin jack video in: For camera 1, 2 NTSC 75 ohms terminalDC IN: HS-AC1 only (not supplied)10 V: by JEITA TYPE4 Jacks19.5 V: by JEITA TYPE5 JacksDB1, DB2, CHIME: Wire requirements: Copper Wire AWG 26 - 18Outer diameter: 3 mm (0.12 inches), maximumStrip away: 10 mm (0.4 inches)RS-232C (DB9 Straight): For stack connection and service onlyGENERALDC Power consumption (when HS-KP1, HS-WV1, HS-WA1,HS-WD1,and CAV-CVB1 are not connected):DC 19.5 V /0.6 A (ZONE 1 - 4), 0.1 A(ZONE 5 - 8)DC 10 V /0.3 A* Use DC 19.5 V for HS-KP1, HS-WV1, HS-WA1, HS-WD1, andCAV-CVB1.For details, refer to the instruction manual of each product.* Use DC 10 V only for HS-MB1. Even if you connect the DC 10 V toHS-MB1, no power is supplied HS-KP1, HS-WV1, HS-WA1, HS-WD1, or CAV-CVB1.Operating temperature: 0 ˚C - 30 ˚C (32 ˚F - 86 ˚F)Storage temperature: –20 °C - 60 °C (–4 °F - 140 °F)Dimensions: 290 × 250 × 55 mm(11 1/22 × 9 7/8 × 21 3/4 inches) (w/h/d)Mass: 2 kg (4 lbs 6 1/2 oz.)Supplied accessoriesHS-AC1AC power cord (mains lead)Installer’s manualDesign and specifi cations are subject to change without notice.• HS-AC1 is attached to HS-MB1.Please refer to service manual ofHS-AC1 for information on HS-AC1. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved