Menu
Sony HMI-3000MT Instructions For Use Manual
Also see for HMI-3000MT: Manual
                                     |
17Parts IdentificationOverviewRearA Equipotential grounding terminalEqualizes potential for all devices connected to the unit.B t INPUT connectors• SDI 1(2D) input connectorInputs SDI signals for 2D or 3D video. When inputtingthe left and right eye videos of a 3D video via separatecables, input the left eye video to this connector.• SDI 2(3D) input connectorInputs SDI signals for 3D video. When inputting the leftand right eye videos of a 3D video via separate cables,input the right eye video to this connector.CautionDo not touch the patient while touching the center pin ofthe SDI connector.If there is a fault with the unit or the AC adaptor, a voltagemay be generated that may harm the patient.• DVI-D 1(2D) input connectorInputs DVI signals for 2D or 3D video. When inputtingthe left and right eye videos of a 3D video via separatecables, input the left eye video to this connector.• DVI-D 1(3D) input connectorInputs DVI signals for 3D video. When inputting theleft and right eye videos of a 3D video via separatecables, input the right eye video to this connector.C T OUTPUT connectors• SDI 1(2D) output connectorConnects to a monitor or another image processor unit,and outputs SDI signals for 2D or 3D video. Whenoutputting the left and right eye videos of a 3D video viaseparate cables, output the left eye video from thisconnector.• SDI 2(3D) output connectorConnects to a monitor or another image processor unit,and outputs SDI signals for 3D video. When outputtingthe left and right eye videos of a 3D video via separatecables, output the right eye video from this connector.• DVI-D 1(2D) output connectorConnects to a monitor or another image processor unit,and outputs DVI signals for 2D or 3D video. Whenoutputting the left and right eye videos of a 3D video viaseparate cables, output the left eye video from thisconnector.• DVI-D 1(3D) output connectorConnects to a monitor or another image processor unit,and outputs DVI signals for 3D video. When outputtingthe left and right eye videos of a 3D video via separatecables, output the right eye video from this connector.D REMOTE connectorsConnect to FS-24 foot switches (not supplied) or otherremote controllers. Two connectors are available forHMM-A and HMM-B.E DC IN connectorConnects to the supplied AC adaptor.WARNING 27The connectors on this unit are not isolated.Do not connect any device other than one which conformsto IEC 60601-1 standards.When an information technology device or AV device thatuses an alternating current is connected, current leakagemay result in an electric shock to the patient or operator.If use of such a device is unavoidable, isolate its powersupply by connecting an isolation transformer, or byconnecting an isolator between the connecting cables.After implementing these measures, confirm that thereduced risk now conforms to IEC 60601-1 standards.CautionConnect the DC connector to the equipment, and thenconnect the AC power cord of the AC adaptor.When disconnecting the DC connector, disconnect theAC power cord of the AC adaptor before disconnectingthe DC connector. |
Related manuals for Sony HMI-3000MT
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved