Sony HFBK-TS1 Operation Manual

i.LINK (HDV) INTERFACE BOARDHFBK-TS1For the customers in the U.S.A.This equipment has been tested and found to comply with the limits for aClass A digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interferencewhen the equipment is operated in a commercial environment. Thisequipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instruction manual, maycause harmful interference to radio communications. Operation of thisequipment in a residential area is likely to cause harmful interference inwhich case the user will be required to correct the interference at his ownexpense.You are cautioned that any changes or modifications not expresslyapproved in this manual could void your authority to operate this equipment.All interface cables used to connect peripherals must be shielded in order tocomply with the limits for a digital device pursuant to Subpart B of Part 15 ofFCC Rules.This device complies with part 15 of FCC Rules.Operation is subject to the following two conditions: (1) This device may notcause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesiredoperation.For customers in CanadaThis Class A digital apparatus complies with Canadian ICES-003.Pour les utilisateurs au CanadaCet appareil numèrique de la classe A est conforme à la norme NMB-003du Canada.For the customers in EuropeThis product with the CE marking complies with the EMC Directive issuedby the Commission of the European Community.Compliance with this directive implies conformity to the following Europeanstandards:• EN55103-1: Electromagnetic Interference (Emission)• EN55103-2: Electromagnetic Susceptibility (Immunity)This product is intended for use in the following ElectromagneticEnvironment(s):E1 (residential), E2 (commercial and light industrial),E3 (urban outdoors) and E4 (controlled EMC environment, ex. TV studio).The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan.The Authorized Representative for EMC and product safety is SonyDeutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.Pour les clients en EuropeCe produit portant la marque CE est conforme à la Directive sur lacompatibilité électromagnétique (EMC) émise par la Commission de laCommunauté Européenne.La conformité à cette directive implique la conformité aux normeseuropéennes suivantes:• EN55103-1: Interférences électromagnétiques (émission)• EN55103-2: Sensibilité électromagnétique (immunité)Ce produit est prévu pour être utilisé dans les environnementsélectromagnétiques suivants:E1 (résidentiel), E2 (commercial et industrie légère),E3 (urbain extérieur) et E4 (environnement EMC contrôlé, ex. studio detélévision).Le fabricant de ce produit est Sony Corporation, 1-7-1 Konan, Minato-ku,Tokyo, Japon.Le représentant autorisé pour EMC et la sécurité des produits est SonyDeutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Allemagne.i.LINKHDVi.LINK is a trademark of Sony Corporation.HDV is a trademark of Sony Corporation and Victor Company of Japan, Ltd.i.LINK est une marque de commerce de Sony Corporation.HDV est une marque de commerce de Sony Corporation et Victor Companyof Japan, Ltd.•••••For installation instructions, refer to “Mounting an OptionalBoard” in the Operation Manual supplied with the product inwhich this board is to be mounted.Pour les instructions d’installation, reportez-vous à « Montaged’une carte en option » dans le Mode d’emploi livré avec leproduit dans lequel installer la carte.OPERATION MANUAL[Japanese/English/French]1 AUDIO2 DIP1 5 Lip SyncSW1 SW2 SW3 SW4 SW56783 i.LINK (HDV) OUT i.LINK 6•••••–EnglishOverviewThe HFBK-TS1 is an optional board designed to be installed in thefollowing apparatuses:• HFU-X310 HD Camera Interface Unit• BRC-H700 HD 3CCD Color Video Camera• BRU-H700 HD Optical Multiplex UnitThe board supplies images from the color video camera connectedto the apparatus that accommodates the board via the i.LINKdigital interface after conversion to the 1080i format of the HDVstandards. It also accepts audio signals from the AUDIOconnectors.When the board is installed in an HFU-X310 that supportsembedded audio and time code, the embedded audio (48 kHzsampling) and time code (LTC) of the HD-SDI signal supplied tothe HD-SDI IN connector of the HFU-X310 are output afterconversion to signals of the HDV standards.Locations and Functions of Parts123R L i.LINK (HDV) OUTAUDIOHFBK-TS1Sony Corporation  2005Printed in Japan 2008.11.133-990-338-04(1)R L i.LINK (HDV) OUTAUDIOHFBK-TS12 DIP switches (behind the cover)1 AUDIO connectors3 i.LINK (HDV) OUTconnector

/ 2

Related manuals for Sony HFBK-TS1