Help GuideDigital 4K Video Camera Recorder/Digital HD Video Camera RecorderFDR-X3000/HDR-AS300/HDR-AS50On moisture condensationIf the camera is brought directly from a cold to a warm location, moisture may condense inside or outside the camera.This moisture condensation may cause a malfunction of the camera.If moisture condensation occursTurn off the camera and wait about 1 hour for the moisture to evaporate.Note on moisture condensationMoisture may condense when you bring the camera from a cold place into a warm place (or vice versa) or when you usethe camera in a humid place as shown below.When you bring the camera from a ski slope into a warm place.When you bring the camera from an air conditioned car or room into a hot place outside.When you use the camera after a squall or a shower.When you use the camera in a hot and humid place.How to avoid moisture condensationWhen you bring the camera from a cold place into a warm place, put the camera in a plastic bag and seal it tightly.Remove the bag when the air temperature inside the plastic bag has reached the ambient temperature (after about 1hour).