Menu
Sony HDR-AS30 Operating Manual
Also see for HDR-AS30V: Quick guideUpdate guideHandbookOperating guideOperating guide
  |
4-479-707-11(1)© 2013 Sony Corporation Printed in ChinaHDR-AS30 / AS30Vhttp://www.sony.net/Digital HD Video Camera RecorderOperating GuideThe information on the sticker (in the perforated box, below) is required whenconnecting the camera to a smartphone. If there is no sticker, refer to the suppliedEnglish version of the instruction manual.If the sticker is lost, you can recall your user ID and password by the followingprocedure. Insert a charged battery pack into the camera. Connect the camera to a computer with the micro USB cable (supplied). Press the NEXT or PREV button to power on. Display [Computer] [PMHOME] [INFO] [WIFI_INF.TXT] on yourcomputer, then confirm your ID and password.Checking the bundled itemsCamera (1)Camera is set in the Waterproof Case. Open the cover of the case as illustrated below.Micro USB cable (1)Rechargeable battery pack (NP-BX1) (1)Waterproof Case (1)Attachment Buckle (1)Flat Adhesive Mount (1)Curved Adhesive Mount (1)HandbookIncluded in the internal memory of this camera.Set of printed documentationParts and controls REC/access lamp REC (Movie/Photo) button/ENTER (Menu execute) button REC HOLD switch (N mark)NFC: Near Field Communication Display panel Speaker PREV button NEXT button Microphones Lens GPS sensor (HDR-AS30V only) Connector cover (Mic) jack Expansion connector CHG (Charge) lamp HDMI OUT jack Multi/Micro USB TerminalSupports Micro USB compatibledevices. Battery pack/memory card cover Memory card insertion slot Battery ejection lever Battery insertion slotGetting StartedCharging the battery pack1 Open the cover.2 Insert the battery pack.Slide the battery ejection lever.To close the cover, perform the operations in step 1 in opposite order.3 Confirm that the camera is turned off.To turn off the camera, press the NEXT button several times to display[PwOFF], then press the ENTER button.4 Connect the Multi/Micro USB Terminal of the camera to acomputer with the micro USB cable (supplied).CHG (Charge) lampMicro USB cableInserting a memory card“Memory Stick Micro”(Mark2) mediamicroSD card/microSDHC card/microSDXC cardPrinted side Terminal sideInsert the memory card properly, confirming each side is facing the correct direction.On the format of the memory cardFor details, refer to the Handbook (PDF).NotesOperation with all memory cards is not assured.Confirm the direction of the memory card. If you forcibly insert the memory card in thewrong direction, the memory card, memory card slot, or image data may be damaged.Format the memory card before use.To eject the memory card, lightly push the memory card once.SettingButton operationsNEXT: Goes to the next menuPREV: Goes to the previous menuENTER: Executes the menuMenu itemsList of modes Items you can set in SETUP (Setup Mode)Display Modes Display ItemsMOVIE Movie Mode VIDEO Recording modePHOTO Photo Mode STEDY SteadyShotINTVL Interval Photo RecordingModeANGLE Field AngleSETUP Setup Mode SCENE ScenePLAY Play Mode LAPSE Interval Photo RecordingPwOFF Power off Wi-Fi Smart Remote ControlGPS GPS LogPLANE Airplane ModeA.OFF Auto Power OffBEEP BeepDATE Date & Time SettingUSBPw USB Power SupplyV.SYS Switching NTSC/PALRESET Resetting the SettingsFORMT FormatNotesPressing the NEXT or PREV button repeatedly cycles through the respective mode/setup items.To return to the [SETUP] menu from each setup item, select [BACK], then press the ENTER button.The following operations are available when the power of the camera is turned off.- Press the PREV or NEXT button to turn on the camera.- Press the ENTER button to start recording in the shooting mode you set before turningoff the power of the camera.The display language cannot be changed.RecordingAttach accessories to the camera, as required.1 Press the NEXT or PREV button to power on.2 Select a shooting mode from [MOVIE], [PHOTO] and [INTVL].3 Press the REC button to start recording.To stop movie recording/interval photo recordingPress the REC button again.NotesPlayback of images recorded with other cameras, is not assured on this camera.During periods of extended shooting, camera temperature may rise to a point whereshooting stops automatically.On what to do if this happens, see “Notes on long-time recording.”Using the Wi-Fi functionInstalling “PlayMemories Mobile” on yoursmartphoneAndroid 2.3 or later (Android 4.0 or later is required to use One-touchfunctions (NFC))Search for “PlayMemories Mobile” on Google Play, then install it.iOS 4.3 or later (One-touch functions (NFC) are not available)Search for “PlayMemories Mobile” on App Store, then install it.NotesUpdate “PlayMemories Mobile” to the latest version if you have already installed it on yoursmartphone.Operation of this application with all smartphones and tablets is not assured.Compliant OS version is information as at September 1, 2013.The operation methods and display screens for the application are subject to changewithout notice by future upgrades.For more information about “PlayMemories Mobile,” refer to the following website.(http://www.sony.net/pmm/)EnglishOwner’s RecordThe model and serial numbers are located inside the connector cover. Record theserial number in the space provided below. Refer to these numbers whenever youcall your Sony dealer regarding this product.Model No. HDR-ASSerial No.Read this firstThis manual covers basic operations. For more detailed operations, refer to theHandbook (PDF) built into this camera, by doing the following. Insert a charged battery pack into the camera. Connect the camera to a computer with the micro USB cable (supplied). Press the NEXT or PREV button to power on. Display [Computer] [PMHOME] [HANDBOOK] on your computer,then install the Handbook (PDF). |
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved