SERVICE MANUALSony CorporationHome Audio DivisionPublished by Sony Techno Create CorporationUS ModelCanadian Model9-887-229-012006D04-1© 2006.04Ver. 1.0 2006.04SPECIFICATIONSSA-FT1H/WPFT1/SS-CNPFT1/MSPFT1/SRPFT1AUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTAL HARMONIC DISTORTION:With 6 ohm loads, from 45 – 180 Hz; rated 120 watts perchannel minimum RMS power, with no more than 10% totalharmonic distortion from 250 milliwatts to rated output.SS-MSPFT1 (front speakers)Speaker system 2 way, magneticallyshieldedSpeaker units Woofer: 8 cm, cone typeTweeter: 2.5 cm, balanceddome typeEnclosure type Bass reflexRated impedance 8 ohmsPower handling capacityMaximum input power: 110 WSensitivity level 84 dB (1 W, 1 m)Frequency range 140 Hz - 50,000 HzDimensions (w/h/d) Approx. 108 × 215 × 44 mmwith table top stand Approx. 108 × 224 × 44 mm(Diameter of base:150 mm)Mass Approx. 0.5 kgwith table top stand Approx. 0.6 kgSS-SRPFT1 (surround speakers)Speaker system 1 way, magneticallyshieldedSpeaker units Full range: 8 cm, cone typeEnclosure type Bass reflexRated impedance 8 ohmsPower handling capacityMaximum input power: 110 WSensitivity level 84 dB (1 W, 1 m)Frequency range 140 Hz - 20,000 HzDimensions (w/h/d) Approx. 108 × 215 × 44 mmwith table top stand Approx. 108 × 224 × 44 mm(Diameter of base:153 mm)Mass Approx. 0.45 kgwith table top stand Approx. 0.55 kg• SA-FT1H is composed of following models.COMPONENT MODEL NAMEFRONT/SURROUND SPEAKER SS-MSPFT1/SRPFT1CENTER SPEAKER SS-CNPFT1SUBWOOFER SA-WPFT1– Continued on next page –SA-WPFT1 SS-MSPFT1SS-SRPFT1 SS-CNPFT1HOME THEATRE SPEAKER SYSTEM