Chapter 3 Connections and Settings 69Chapter 3 Connections and SettingsConnecting DSR-series digital VCRsIn this example, both SDI and QSDI signals areconnected. The roles of the signals are as follows.SDI signals: Used in linear editing and hybridediting.QSDI signals: Used in non-linear editing and foruploads and downloads at 4 times normal speed.NoteWhen using QSDI input signals, analog video andaudio input signals should also be connected. (See thenext page.)2 9-pin remote controlcable (option)1 75 Ω coaxial cable withBNC connectors (option)See the digital Betacam VCR connectionexample (page 68) for connecting acontrol panel.DSR-85/85P (Recorder)DSR-85/85P (Player 1)DSR-85/85P (Player 2)You can do the following with a system configured asshown below.• Do linear editing using VCR playback of materialsstored on tape.• Copy clips from tape to the disk recorder at 4 timesnormal speed.• Do non-linear editing using materials stored on thedisk recorder.• Record the results of the edit on tape as serial digitalvideo signals at 4 times normal speed.COMPOSITEOUTQSDI INQSDI OUTREF. VIDEOINREMOTEQSDI INPUTR/P2RECORDERPLAYER 2QSDI OUT RMON INREMOTEREF. VIDEOINSDI OUTQSDI INPUT P1SDI INPUT P2SDI OUTSDI INSDI OUTR (PGM) SDI INPUT RB B OUT 1PLAYER 1SDI INPUT P1REF. VIDEOINSDI OUTQSDI OUT REMOTE1112112211111
