42 SpecificationsSpecificationsReceiving SectionReceiver Type Rackmount (2 channels)Transmission MethodWiDIF-HP (×2)Reception TypeSpace diversityCircuit SystemDouble superheterodyneLocal Oscillators TypeCrystal-controlled PLL synthesizerAntenna Type DetachableRF Sensitivity 20 dBμ or less (at bit error rate = 1 × 10–5 ,no decline in S/N ratio)Antenna SectionInput ConnectorBNC-R, 50 Ω (×2)Supply Voltage for Booster0 V/9 V/12 VAttenuator 0 dB/5 dB/10 dBCascaded OutputBNC-R, 50 Ω (×2)Audio sectionDynamic Range 106 dB or more (A-weighted)Distortion (T.H.D)0.03% or lessAudio Delay 1.9 ms (analog output)1.9 ms (digital output)Analog Output BAL: XLR-3-32 (male), 47 Ω or less(×2)UNBAL: φ6.3 mm (1 / 4 inch) mono jack,220 Ω or less (×2)Output level (0 dBu = 0.775 Vrms)BAL: –22 dBu maximum/–58 dBureference (when MIC output)BAL: +24 dBu maximum/–12 dBureference (when LINE output)UNBAL: +8 dBu maximum/–28 dBureference (when UNBAL ATT =0 dB)Digital Output XLR-3-32 (male), 110 Ω (×1)BNC-R, 75 Ω (×1)Reference output level (0 dBu =0.775 Vrms)–36 dBFsOther EquipmentHeadphone Outputφ6.3 mm ( 1/4 inch) stereo jackWord Sync Input connector: BNC-R with a 75 Ωtermination switchOutput connector: BNC-RExternal Word Sync: 32 kHz to 96 kHzWireless Remote ControlCross Remote (2.4-GHz IEEE802.15.4compliant)LAN Connector RJ-45 modular jack100BASE-TX: IEEE802.3u compliant10BASE-T: IEEE802.3 compliantDisplay OLEDGeneralPower RequirementsAC: 100 to 240 V 0.4 A or lessDC: 12 V 1.6 A or lessPower ConsumptionAC: 24 WDC: 19.2 WOperating Temperature0 °C to 50 °C (32 °F to 122 °F)Storage/Transport Temperature–20 °C to +60 °C (–4 °F to +140 °F)Dimensions (unit: mm (inches))** The values for dimensions are approximate.Mass Approx. 3.6 kg (7 lb 15 oz) (including theattached antenna)Supplied AccessoriesWhip antenna (2)Antenna mount with BNC connector (2)AC power cord (1)Foot (4)Operating Instructions (1)Operating Instructions (CD-ROM) (1)PC control software (CD-ROM) (1)Warranty card (US models only) (1)