Sony DR-EX39PP Operating Instructions Manual

Stereo HeadsetDR-EX39PP©2010 Sony Corporation Printed in Thailand4-256-084-21(1)Operating Instructions使用說明書Coloured parts彩色部分 Sectional View剖面圖12abc1 2EnglishStereo HeadsetFeatures Stereo Headset with in-line microphone and answer/endbutton for hands-free phone calls. Easy to use volume control. 3 sizes of earbuds (S, M, L) supplied for stable andcomfortable fit in the ear. Hybrid silicone rubber earbuds for secure fit and long-term wearing comfort. Convenient cord adjuster supplied.How to use (see fig. )1 Connect the headset to the mobile phone.Connection to the mobile phone can be made in accordance withthe Open Mobile Terminal Platform (OMTP).Not compatible with iPod*, iPhone*, HTC or BlackBerry.* iPod, iPhone, iPod classic, iPod nano, iPod shuffle and iPodtouch are trademarks of Apple Inc., registered in the U.S.and other countries.2 Wear the earpiece marked  in your right ear, andthe one marked  in your left ear.There is a tactile dot on the unit marked  to distinguish the leftside.Using the cord sliderMove up and down to change the split position of the cord(see fig. -).After you use the headset, keep it with the cord slider highpositioned to avoid entangling the cord.Installing the earbuds correctlyIf the earbuds do not fit your ears correctly, low-bass soundmay not be heard. To enjoy better sound quality, change theearbuds to another size, or adjust the earbuds position to siton your ears comfortably and fit your ears snugly.If the earbuds do not fit your ears, try another size. Confirmthe size of the earbuds by checking colour inside (see fig.-).When you change the earbuds, install them firmly on theheadset to prevent the earbud from detaching andremaining in your ear.Earbud sizes (inside colour)SmallLargeS(Orange)M(Green)L(Light blue)To detach an earbud (see fig. -)While holding the headset, twist and pull the earbud off. TipIf the earbud slips and cannot be detached, wrap it in a dry soft cloth.To attach an earbud (see fig. -)Push the parts inside of the earbud into the headset until theprojecting part of the headset is fully covered.To clean the earbudsRemove the earbuds from the headset, and wash them witha mild detergent solution.Using the microphone/controller (see fig. )a: MicrophoneUse to make a hands-free phone call.b: VolumeRotate upward to increase the volume and rotate downward todecrease the volume.c: Answer/End buttonWhen receiving a phone call, push the button to speak. Todisconnect, push the button again.NoteThe usage of this button is different according to the mobile phoneused. For details, refer to the manual of the mobile phone.Adjusting the cord length (see fig. )You can adjust the cord length by winding the cord on thecord adjuster.(The cord can be wound to the cord adjuster up to 50 cm. Ifyou wind more, the cord comes off from the cord adjustereasily.)1 Wind the cord.2 Push the cord into a slot hole to secure in place.NoteDo not wind the plug or split section of the cord, as it will strain thecord and may cause a wire break.SpecificationsCord: 1.2 m (47 1/4 in), Y-type / Plug: Four-conductor stereomini plug for OMTP* 3.5mm audio connector / Mass:Approx. 3 g (0.11 oz) without cordType: Closed, dynamic / Driver units: 9 mm, dome type(CCAW voice coil) / Power handling capacity: 100 mW(IEC**) / Impedance: 16 Ω at 1 kHz / Sensitivity: 100 dB/mW / Frequency response: 6 – 23,000 HzDesign: In-line microphone / Type: Electret condenser /Open circuit voltage level: -38 dB (0 dB = 1 V/Pa) / Effectivefrequency range: 20 – 20,000 HzCord adjuster (1) / Earbuds (S (2), M (2), L (2)) / OperatingInstructions (1)* OMTP = The Open Mobile Terminal Platform (OMTP) is a mobilenetwork operators’ platform that has created an industry standardfor wired connectivity to improve compatibility between mobilephones and phone headsets.** IEC = International Electrotechnical CommissionDesign and specifications are subject to change withoutnotice.Precautions Please keep your headset clean at all times especiallyinside the rubber earbud (see fig. ).If any dust or ear wax inside the earbud, you mayexperience some listening difficulties. Listening with headset at high volume may affect yourhearing. For traffic safety, do not use while driving orcycling. Do not put weight or pressure on the headset as it maycause the headset to deform during long storage. The earbuds may deteriorate due to long-term storage oruse. Install the earbuds firmly onto the headset. If an earbudaccidentally detaches and is left in your ear, it may causeinjury.Note on static electricityIn particularly dry air conditions, mild tingling may be felton your ears. This is a result of static electricity accumulatedin the body, and not a malfunction of the headset.The effect can be minimized by wearing clothes made fromnatural materials.Optional replacement earbuds can be ordered from yournearest Sony dealer.繁體中文立體聲耳機特點 帶有線控麥克風和接聽 / 結束按鈕立體聲耳機，適合免持通話。 容易使用音量控制。 隨附 3 種尺寸的耳塞（S、M、L），可以穩定舒適地貼合在耳內。 混合矽膠耳塞貼合更牢固，且長時間聆聽也不會感到不適。 隨附導線長度調節器，方便使用。使用方法（見圖 ）1 將耳機連接到手機。可以根據開放行動終端平台（OMTP）連接到手機。與 iPod*、iPhone*、HTC 或 BlackBerry 不相容。* iPod、iPhone、iPod classic、iPod nano、iPodshuffle 和 iPod touch 是 Apple Inc. 在美國和其他國家註冊的商標。2 將有  標記的耳機戴在右耳， 標記的耳機戴在左耳。 標記的耳機上有一個觸覺點，能夠識別左側。使用導線滑動器上下移動來變更導線的開叉位置（見圖 -）。使用耳機後，將導線滑動器保持在高處，以免導線糾結。正確安裝耳塞如果耳塞無法正確貼合您的耳朵，您便可能無法聽到重低音。為了享受更佳音質，請更換耳塞尺寸，或調整耳塞的位置以舒適貼合您的耳朵。如果耳塞不適合您的耳形，請更換耳塞尺寸。檢查內部顏色以確認耳塞尺寸（見圖 -）。當您更換耳塞時，請將其牢固地安裝在耳機上以防止耳塞脫落在您耳朵內。耳塞大小（內部顏色）小大S（橘色）M（綠色）L（淺藍色）拆掉耳塞的方式（見圖 -）拿著耳機，然後轉動耳塞，把耳塞拔出來。 提示如果耳塞脫落，無法拆掉，請用柔軟的乾布包住耳塞。安裝耳塞的方式（見圖 -）將耳塞內的組件推入耳機裡，直到完全覆蓋耳機突出部分為止。清潔耳塞將耳塞從耳機體上拆下，並以中性清潔劑溶液清洗。使用麥克風 / 控制器（見圖 ）a: 麥克風用於撥打免持電話。b: 音量向上旋轉可增大音量，向下旋轉可降低音量。c: 接聽 / 結束按鈕接收來電時，按下此按鈕以通話。若要中斷，再按一次此按鈕。注意此按鈕的使用方式因使用的手機而異。詳細說明，請參閱手機手冊。調整導線長度（見圖 ）您可以將導線繞在導線長度調節器上以調節導線長度。（導線最多可以在導線長度調節器上繞 50 cm。如果所繞的長度超過此限制，導線容易脫離導線長度調節器。）1 捲繞導線。2 將導線推入槽孔以固定到位。注意請勿捲起導線的插頭或開叉部分，否則會繃壞導線並可能使導線斷裂。規格導線：1.2 m，Y 型 / 插頭：用於 OMTP* 3.5 mm 音訊接頭的四導體立體聲迷你插頭 / 質量：不包括導線約 3 g< 耳機 >型式：封閉式，動態 / 激勵單元：9 mm，圓頂型（CCAW 音圈）/ 功率處理容量：100 mW（IEC** ）/ 阻抗：1 kHz 時 16Ω/ 靈敏度：100 dB/mW/ 頻率響應：6 - 23000 Hz< 麥克風 >設計：線控麥克風 / 型式：駐極體電容式 / 開路電壓電平：–38 dB（0 dB = 1 V/Pa）/ 有效頻率範圍：20 -20000 Hz< 附件 >導線長度調節器（1）/ 耳塞（S（2）、M（2）、L（2））/ 使用說明書（1）* OMTP = 開放行動終端平台 (OMTP) 是行動網路業者平台，為有線連接建立業界標準，以改善手機與耳機的相容性。** IEC = 國際電工委員會設計和規格如有變更，恕不另行通知。注意事項 請隨時保持耳機的清潔，尤其是橡膠耳塞的內部（見圖）。如果耳塞有灰塵或耳垢，您可能會無法順利聆聽音樂。 戴著耳機用很高的音量收聽可能會影響您的聽力。為了交通安全，切勿在駕車或騎車時使用耳機。 請勿將重物放置在耳機上或施加壓力，因為長時間存放時可能會造成耳機變形。 耳塞可能會因為長期存放或使用而損壞。 將耳塞牢固地安裝在耳機上。如果耳塞不小心脫落在您耳朵內，可能會造成傷害。關於靜電的注意事項天氣乾燥時，您的耳朵可能會出現輕微疼痛。這並非耳機故障所造成的，而是由於您的身體積累靜電所致。如果您穿著的衣物是由不易產生靜電的天然材料製成，就可減少這種情況。可向附近的 Sony 經銷商訂購選購的替換耳塞。

/ 2

Related manuals for Sony DR-EX39PP