Menu
Sony DCR-VX2100 Adjustment Manual
Also see for DCR VX2100 - Handycam Camcorder - 380 KP: Operating instructionsSpecificationsSpecificationsService manualService manual
                                                                    |
6-11DCR-VX2100/VX2100E1-2-2. INITIALIZATION OF B PAGE DATANote: When reading the B page data, insert a “Memory Stick” into the“Memory Stick” slot.Switch setting:POWER ................................................................. MEMORY1. Initializing the B Page DataNote: If the B page data has been initialized, the following adjustmentsneed to be performed again.1) Modification of B page dataAdjustment Page BAdjustment Address 00 to FFInitializing MethodOrder Page Address Data Procedure1 0 01 01 Set the data.2 5 01 F3 Set the data, and press PAUSEbutton.3 5 00 01 Set the data, and press PAUSEbutton.4 5 01 Wait for three seconds.5 5 00 Check that the data is “00”.6 5 02 Check that the data is “00”.7 Perform “Modification of BPage Data”.2. Modification of B Page DataIf the B page data has been initialized, change the data of the “Fixeddata-2” address shown in the following tables by manual input.Preparations:Order Page Address Data Procedure1 2 8F 00 Set the data, and press PAUSEbutton.2 2 8F 03 Set the data, and press PAUSEbutton.3 2 8F 00 Set the data, and press PAUSEbutton.Modifying Method:1) Before changing the data, select page: 0, address: 01, and setdata: 01.2) New data for changing are not shown in the tables becausethey are different in destination. When changing the data, copythe data built in the same model.Note: If copy the data built in the different model, the camcorder maynot operate.3) When changing the data, press the PAUSE button of theadjustment remote commander each time when setting newdata to write the data in the non-volatile memory.Processing after Completing Modification of B Page data:Order Page Address Data Procedure1 2 00 29 Set the data.2 2 01 29 Set the data, and press PAUSEbutton.3. B Page TableNote: Fixed data-1: Initialized data. (Refer to “1. or 3. Initializing the BPage Data”.)Fixed data-2: Modified data. (Refer to “2. or 4. Modification of BPage Data”.)Table. 6-1-5.Address Remark00 to 3A3B3C to 3D3E3F to 5F6061 to FFFixed data-1Fixed data-2Fixed data-1Fixed data-2Fixed data-1Fixed data-2Fixed data-1 |
Related manuals for Sony DCR VX2100 - Handycam Camcorder - 380 KP
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved