Sony DCR-SR220 Handycam&reg Operating Manual

Also see for DCR-SR220D - 120gb Hard Disk Drive Handycam Camcorder: Limited warranty Reference Handbook Specifications User guide

Contents

USif not installed and used in accordancewith the instructions, may cause harmfulinterference to radio communications.However, there is no guarantee thatinterference will not occur in a particularinstallation. If this equipment does causeharmful interference to radio or televisionreception, which can be determinedby turning the equipment off and on,the user is encouraged to try to correctthe interference by one or more of thefollowing measures: Reorient or relocate the receiving antenna. Increase the separation between theequipment and receiver. Connect the equipment into an outlet ona circuit different from that to which thereceiver is connected. Consult the dealer or an experienced radio/TV technician for help.The supplied interface cable must be usedwith the equipment in order to complywith the limits for a digital device pursuantto Subpart B of Part 15 of FCC Rules.For the State of California, USA onlyPerchlorate Material - special handling mayapply, Seewww.dtsc.ca.gov/hazardouswaste/perchloratePerchlorate Material: Lithium batterycontains perchlorate.Notes on useSupplied itemsThe numbers in ( ) are the suppliedquantity. AC Adaptor (1) Power cord (Mains lead) (1) Handycam Station (1)  A/V connecting cable (1)  USB cable (1)  Wireless Remote Commander (1)A button-type lithium battery is alreadyinstalled. Rechargeable battery pack NP-FH60 (1) CD-ROM “Handycam Application Software”(1) (p. 24) Picture Motion Browser (Software) PMB Guide Handycam Handbook (PDF) “Operating Guide” (This manual) (1)Using the camcorder The camcorder is not dustproofed, dripproofedor waterproofed. See “Precautions” (p. 30). Do not do any of the following when the(movie)/ (still image) lamps (p. 10) orACCESS lamps (p. 12, 16) is lit or flashing.Otherwise the media may be damaged, recordedimages may be lost or other malfunctions couldoccur. Remove the “Memory Stick PRO Duo.” Remove the battery pack or AC Adaptor fromthe camcorder. Apply mechanical shock or vibration to thecamcorder. When connecting your camcorder to anotherdevice with a cable, be sure to insert theconnector plug in the correct way. Pushing theplug forcibly into the terminal will damage theterminal and may result in a malfunction ofyour camcorder. Do not apply shock or vibration to yourcamcorder. The hard disk of the camcorder maynot be recognized, or recording or playbackmay not be possible. Do not use your camcorder in very loud areas.The hard disk of the camcorder may not berecognized, or recording may not be possible. To protect the internal hard disk from shockby dropping, the camcorder has drop sensorfunction*. When a drop occurs, or under a non-gravity condition, the block noise made whenthis function is activated by the camcorder mayalso be recorded. If the drop sensor catches adrop repeatedly, recording/play back may bestopped. When the temperature of the camcorderbecomes extremely high or extremely low, youmay not be able to record or play back on thecamcorder, due to the protection features of thecamcorder being activated in such situations.In this case, an indicator appears on the LCDscreen (p. 28).US