FM radioListening to the radioThe FM radio in your device works like any FM radio. For example, you can browseand listen to FM radio stations and save them as favourites. You must connect awired headset or headphones to your device before you can use the radio. This isbecause the headset or headphones act as an antenna. After one of these devices isconnected, you can then switch the audio to the speaker, if desired.1 Favourites list2 Radio on/off button3 View menu options4 Tuned frequency5 Save or remove a channel as a favourite6 Tuning dial7 Frequency band – drag left or right to move between channels8 Move up the frequency band to search for a channel9 A saved favourite channel10 Move down the frequency band to search for a channelTo listen to the FM radio1 Connect a headset or a set of headphones to your device.2 From your Home screen, tap .3 Find and tap FM radio . The available channels appear as you scroll throughthe frequency band.When you start the FM radio, available channels appear automatically. If a channel has RDSinformation, it appears a few seconds after you start listening to the channel.To move between radio channels• Drag the frequency band left or right.To start a new search for radio channels1 When the radio is open, press .2 Tap Search for channels. The radio scans the whole frequency band, and allavailable channels are displayed.82This is an Internet version of this publication. © Print only for private use.