Sony D6633 User Manual

Also see for Xperia Z3: User guide Troubleshooting guide Working instructions Quick start guide Manual

To Create a Smart Connect™ Event1 From your Homescreen, tap , then find and tap .2 If you are opening Smart Connect™ for the first time, tap OK to close theintroduction screen.3 On the Events tab, tap .4 If you are creating an event for the first time, tap OK again to close theintroduction screen.5 Add conditions you want to trigger the event under. A condition could be theconnection with an accessory, or a specific time interval, or both.6 Tap to continue.7 Add what you want to happen when you connect an accessory, and set othersettings as desired.8 Tap to continue.9 Set an event name, then tap Finish.To add a Bluetooth® accessory, you have to first pair it with your device.To Edit a Smart Connect™ Event1 Start the Smart Connect™ application.2 On the Events tab, tap an event.3 If the event is switched off, drag the slider to the right to turn it on.4 Tap Edit event, then adjust the settings as desired.To Delete an Event1 Start the Smart Connect™ application.2 On the Events tab, touch and hold the event you want to delete, then tap Deleteevent.3 Tap Delete to confirm.You can also open the event you want to delete, then tap > Delete event > Delete.To Set Smart Connect™ to Read out Incoming Text Messages1 Start the Smart Connect™ application.2 Tap , then tap Settings.3 Mark the checkbox beside Text To Speech, then confirm activation, if necessary.If this feature is turned on, all incoming messages are read aloud. To protect your privacy, youmay need to turn off this feature if you are using your device in a public place or at work, forexample.Managing AccessoriesUse the Smart Connect™ application to manage a range of smart accessories you canconnect to your device, including Xperia™ SmartTags, a SmartWatch series watch, or awireless headset from Sony. Smart Connect™ downloads any necessary applicationsand also finds third-party applications, when available. Previously connected accessoriesare shown in a list that allows you to get more information about the features of eachaccessory.To Pair and Connect an Accessory1 Start the Smart Connect™ application. If you are opening Smart Connect™ forthe first time, tap OK to close the introduction screen.2 Tap Accessories, then tap .3 Turn on the Bluetooth® function if it is not already on, then tap the name of theaccessory that you want to pair and connect with.4 If required, enter a passcode, or confirm the same passcode on both your deviceand the accessory.134This is an internet version of this publication. © Print only for private use.