Menu
Sony Cybershot DSC-P9 Service Manual
Also see for Cyber-shot DSC-P9: SpecificationsOperating instructionsService manualOperating instructionsOperating instructions
                                                                                          |
DSC-P95-91-2-2. Initialization of B, E, F, 7, 9 Page Data1. Initializing B, E, F, 7, 9 Page DataNote: If the B, E, F, 7, 9 Page data has been initialized,“Modification of B, E, F, 7, 9 Page Data” and followingadjustments need to be performed again.1) Modification of B, E, F, 7, 9 page data2) Camera system adjustmentsAdjusting page BAdjusting Address 00 to FFAdjusting page EAdjusting Address 00 to FFAdjusting page FAdjusting Address 00 to FFAdjusting page 7Adjusting Address 00 to FFAdjusting page 9Adjusting Address 00 to FFInitializing Method:Order Page Address Data Procedure1 0 01 012 6 03 0B3 6 00 2D4 6 01 2D Press PAUSE button.5 6 02 Check the data changes to “01”.6 Perform “Modification of B,E, F, 7, 9 page Data”.2. Modification of B, E, F, 7, 9 Page DataIf the B, E, F, 7, 9 Page data has been initialized, change the dataof the “Fixed data-2” address shown in the following tables bymanual input.Modifying Method:1) Before changing the data, select page: 0, address: 01, and setdata: 01.2) New data for changing are not shown in the tables becausethey are different in destination. When changing the data, copythe data built in the same model.Note: If copy the data built in the different model, thecamera may not operate.3) When changing the data, press the PAUSE button of theadjusting remote commander each time when setting new datato write the data in the non-volatile memory.4) Check that the data of adjustment addresses is the initial value.If not, change the data to the initial value.Processing after Completing Modification of B, E, F, 7, 9Page dataOrder Page Address Data Procedure1 2 00 292 2 01 29 Press PAUSE button.3. B Page TableNote 1: Fixed data-1: Initialized data.(Refer to “1. Initializing B, E, F, 7, 9 Page Data”)Note 2: Fixed data-2: Modified data.(Refer to “2. Modification of B, E, F, 7, 9 Page Data”)Address Initial value Remark00 to 6D Fixed data-1 (Initialized data)6E Fixed data-26F to FF Fixed data-1 (Initialized data)4. E Page TableNote 1: Fixed data-1: Initialized data.(Refer to “1. Initializing B, E, F, 7, 9 Page Data”)Note 2: Fixed data-2: Modified data.(Refer to “2. Modification of B, E, F, 7, 9 Page Data”)Address Initial value Remark00 to 94 Fixed data-1 (Initialized data)95 Fixed data-296 Fixed data-297 to CF Fixed data-1 (Initialized data)D0 Fixed data-2D1 to FF Fixed data-1 (Initialized data) |
Related manuals for Sony Cyber-shot DSC-P9
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved