Table ofcontents OperationSearch MENU/SettingsSearch Index73 GBRed Eye ReductionThe flash strobes two or more times before shooting to reduce the red-eye phenomenon whenusing the flash.1 Set the camera to shooting mode.2 MENU t (Settings) t (Shooting Settings) t [Red EyeReduction] t desired mode t z on the control button• To avoid blurring of images, hold the camera firmly until the shutter is released. It usually takes a seconduntil the shutter is released, and also be sure not to allow the subject to move during this period.• Red Eye Reduction may not produce the desired effects. It depends on individual differences andconditions, such as distance to the subject, or if the subject looked away from the pre-strobe.• If you do not use the Face Detection function, Red Eye Reduction does not work, even when you select[Auto].Auto When the Face Detection function is activated, the flash strobesautomatically to reduce the red-eye phenomenon.On The flash always strobes to reduce the red-eye phenomenon.Off Does not use Red Eye Reduction.NoteszWhat causes the red-eye phenomenon?Pupils become dilated in dark environments. Flash light is reflected off the blood vessels atthe back of the eye (retina), causing the “red-eye” phenomenon.Other ways to reduce red-eye• Select (High Sensitivity) mode in Scene Selection. (The flash is set to [Off] automatically.)• When the eyes of the subject turn out red, correct the image with [Retouch] t [Red EyeCorrection] on the viewing menu or with the supplied software “PMB”.Camera EyeRetina
