Sony Cyber-shot DSC-T110 Instruction Manual

Also see for Cyber-shot DSC-T110: Specification sheet Handbook Instruction manual Instruction manual Instruction manual

Contents

Table ofcontents OperationSearch MENU/SettingsSearch Index60 GBUnderwater White Balance(DSC-T110 only)Adjusts the color tone when the camera is set to (Underwater) mode in Scene Selection,(Underwater) mode in [Movie shooting scene] or (Underwater Sweep Panorama) mode.1 Lower the lens cover to switch to shooting mode.2 t (Underwater White Balance)3 Desired mode t [OK]• Depending on the color of the water, the Underwater White Balance may not work correctly even thoughyou select [Underwater 1] or [Underwater 2].• When [Flash] is [On], the underwater white balance can only be adjusted to [Auto], [One Push], or [OnePush Set].• [One Push Set] is unable to be selected while charging the flash.• The white references loaded using [White Balance] and [Underwater White Balance] are storedseparately.(Auto) Automatically adjusts the color tones for underwater conditions tomake the colors appear natural.(Underwater 1) Adjusts for underwater conditions where blue is strong.(Underwater 2) Adjusts for underwater conditions where green is strong.(One Push) Adjusts the white balance depending on the light source. The whitecolor memorized in [One Push Set] mode becomes the basic whitecolor. Use this mode when [Auto] and other settings don’t provideaccurate colors.(One PushSet)Memorizes the basic white color which will be used in [One Push]mode (page 59).Notes