Sony Cyber-Shot DSC-S600 Modifiers Manual

Also see for Cyber-shot DSC-S600: Operating instructions Supplemental instructions Specifications Specifications Software guide

How to hardwire the Sony DSC-S600 Digital CameraCopyright, PixController http://www.PixController.com, all rights reserved.This document covers in detail how to modify the Sony DSC-S600 digital camera for remote shutter control from thePixController Universal or LE camera control board. Please see http://www.pixcontroller.com or emailsupport@pixcontroller.com for more information.Please note that if you make this modification to your Sony camera that you will void yourcamera’s warranty. This modification can also result in damage to your digital camera ifyou do not follow the instructions properly.Tools/Parts Needed1. 2.4 mm #0 Philips Screwdriver & Small Flat Blade Screwdriver.2. Fine tipped soldering iron with heat control.3. 30 Gauge wire. Wire Wrap type wire can be purchased from your local Radio Shack store. Find one of the 3part numbers: 278-501, 278-502, 278-503. They come in a spool of 50 feet of wire for $2.994. Small tweezers.5. Flat blade screw driver or knife.6. PixController Universal board with Sony S40-U PIC chip, or LE board with LE II PIC chip (Use the Sony DSC-S40 mode for the DSC-S600 camera)