18Error displays (when an optional CD/MD unit is connected)The following indications will flash for about 5 seconds, and an alarm sound will be heard.*1 When an error occurs during playback of a CD or MD, the disc number of the CD or MD does not appearin the display.*2 The disc number of the disc causing the error appears in the display.If the above-mentioned solutions do not help improve the situation, consult your nearest Sonydealer.SolutionInsert the disc magazine in the CD/MD unit.Insert discs in the CD/MD unit.Clean or insert the CD correctly.Insert another MD.Insert another CD/MD.Play an MD with tracks recorded onit.Press the RESET button of the unit.Close the lid or insert the MDsproperly.Wait until the temperature goesdown below 50°C (122°F).DisplayNO MAGNO DISCERRORBLANKRESETNOT READYHI TEMPCauseThe disc magazine is not inserted inthe CD/MD unit.No disc is inserted in the CD/MD unit.A CD is dirty or inserted upsidedown.*2An MD does not play because of someproblem.*2A CD/MD cannot play because ofsome problem.No tracks have been recorded on anMD.*2The CD/MD unit cannot be operatedbecause of some problem.The lid of the MD unit is open or MDsare not inserted properly.The ambient temperature is more than50°C (122°F).*1*1