22GBYou can use TYPE I (normal) tape. Therecording level is adjusted automatically.Use buttons on the unit for the operation.1 Load a recordable tape.2 Press FUNCTION repeatedly to switchthe function to CD and load a disc youwant to record.If you have already loaded the disc, pressDISC SKIP/ EX-CHANGE repeatedly (orDISC 1 – 5 on the unit) to select a disc.When you want to record a group from anATRAC CD or MP3 CD, be sure to pressPLAY MODE repeatedly to select , thenpress + or – repeatedly to select thedesired group before proceeding.3 Press CD SYNC.“SYNC” and “REC” appear. The tape deckstands by for recording and the CD playerpauses for playback.4 Press REC PAUSE/START.Recording starts.When the recording is completed, the CDplayer and the tape deck stop automatically.To stop recordingPress x.To record a disc by specifyingtrack orderYou can record only your favorite CD tracksusing Program Play. Between steps 2 and 3,perform steps 2 to 6 of “Creating your ownprogram” (page 16).You can record just the portions you like from aCD or radio program on a tape.You can also record from connectedcomponents (see “Hooking up optionalcomponents” on page 28).Use buttons on the unit for the operation.1 Load a recordable tape.2 Press FUNCTION repeatedly to selectthe desired source to record.• CD: To record from this system’s CDplayer.• TUNER: To record from this system’stuner.• MD: To record from the optionalcomponent connected to the ANALOGIN jack.3 Press REC PAUSE/START.“REC” lights up and the tape deck stands byfor recording.4 Press REC PAUSE/START, then startplaying the desired source to record.Recording starts.Other operationsNotes• You cannot listen to other sources while recording.• Recording stops if you change the function to anotherone.TipFor recording from the tuner:If noise is heard while recording from the tuner, movethe respective antenna to reduce the noise.Tape – RecordingRecording your favoriteCD tracks on a tape— CD-TAPE Synchro RecordingRecording on a tapemanually— Manual RecordingTo Do thisStop recording Press x.Pause recording Press REC PAUSE/START.