15GBTape6 Set the starting time.Press ./> on the remote repeatedly toset the hour, then press ENTER on theremote.The minute indication begins flashing next.Press ./> on the remote repeatedly toset the minute, then press ENTER on theremote.“OFF TIME” appears, then the hourindication flashes again.7 Set the stopping time by repeating step6.The start time, the stopping time,“TUNER”, and the preset station appear inturn, then the original display returns.8 Press @/1 to turn off the system.When the recording starts, the volume levelis automatically set to the minimum.ToCheck the settingsTurn off the timerTipOnce you set the timer, the time settings will remainin the system’s memory until you change them, evenwhen you turn the system or the timer off. Thesettings that were last used will be in effect when youturn the timer on again.Notes• The system will turn on 15 seconds before thespecified starting time.• If the system is turned on at the specified startingtime, recording will not occur.• When you have set the Sleep Timer, the timerrecording will not operate until the Sleep TimerFunction is turned off.• You cannot operate the Daily Timer and the timerrecording at the same time.Do thisPress TIMER SELECT on theremote repeatedly until“c REC” appears in thedisplay. The preset itemsappear in turn.Press TIMER SELECT on theremote repeatedly until“c REC” disappears from thedisplay.Adjusting the soundGenerating a more dynamic sound(Dynamic Sound Generator)Press DSG.To cancel the DSG, press DSG again.Adjusting the bassTurn BASS.You can adjust the bass.Adjusting the trebleTurn TREBLE.You can adjust the treble.Sound AdjustmentSound Adjustment