Sony CLIE Audio Player for Adapter Operating Instructions Manual

Also see for CLIE: Handbook Handbook Troubleshooting

Contents

18Playing audio filesPlay songs as follows using Audio Player for Adapter.Charge the battery fully before starting playback.Notes• If the battery power level of CLIÉ handheld runs low, playback stops automatically.In this case, you can still use other applications such as Memo Pad or Address Book.Remove the Audio Adapter and charge the battery before it becomes completelyempty.• If the battery power level of your CLIÉ handheld runs low, power may turn offsuddenly or an error message may appear when you start the Audio Player forAdapter.1 Connect the headphones to your Audio Adapter.2 Connect the Audio Adapter to your CLIÉ handheld.3 Insert the Memory Stick media into the Memory Stick slot ofyour CLIÉ handheld.4 On the home screen, rotate the JogDial navigator to selectAudio Player and then press the JogDial navigator.Or, tap the Audio Player icon on the home screen.Audio Player for Adapter starts and then reads the TOC informationincluding the song name, artist name and so on of the Memory Stickmedia.While TOC reading, the Memory Stick indicator of the CLIÉ handheldflashes.Do not remove the Memory Stick media at this time. If you do, the audiodata may be damaged and a malfunction may occur.Notes• Unless the built-in battery of the CLIÉ handheld is sufficiently charged, amalfunction may occur, e.g., Audio Player for Adapter does not start, does notoperate, or suddenly turns off. Be sure to check the remaining battery charge beforeusing the Audio Player for Adapter.• Depending on the number of songs stored in the Memory Stick media, it may takeseveral seconds to read the TOC data. You cannot operate Audio Player for Adapterwhile it is reading the TOC information including the song name, artist name andso on; this is not a malfunction.Playing audio files on your CLIÉ handheldContinued on next page