SERVICE MANUALSony CorporationPersonal Audio DivisionPublished by Sony Techno Create CorporationUS ModelCD RADIO CASSETTE-CORDER9-887-035-012006A04-1© 2006.01Ver. 1.0 2006.01SPECIFICATIONSCFD-S01AUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTAL HARMONIC DISTORTIONWith 4-ohm loads, both channels driven from 150 -10,000 Hz; rated1 W per channel-minimum RMS power, with no more than 10 % totalharmonic distortion in AC operation.Other specificationsCD player sectionSystemCompact disc digital audio systemLaser diode propertiesEmission duration: ContinuousLaser output: Less than 44.6 μW(This output is the value measured at a distance ofabout 200 mm from the objective lens surface on theoptical pick-up block with 7 mm aperture.)Number of channels2Frequency response20 - 20 000 Hz +1/–2 dBWow and flutterBelow measurable limitRadio sectionFrequency rangeFM: 87.5 - 108 MHzAM:530 - 1 710 kHzIFFM: 10.7 MHzAM: 450 kHzAntennasFM: Telescopic antennaAM: Built-in ferrite bar antennaCassette-corder sectionRecording system4-track 2 channel stereoFast winding timeApprox. 150 s (sec.) with Sony cassette C-60Frequency responseTYPE I (normal): 80 - 10 000 HzGeneralSpeakerFull range: 8 cm dia., 4 Ω, cone type (2)OutputsHeadphones jack (stereo minijack):For 16 - 32 Ω impedance headphonesPower output1.7 W + 1.7 W (at 4 Ω, 10% harmonic distortion)Power requirementsFor CD radio cassette-corder:120 V AC, 60Hz9 V DC, 6 R14 (size C) batteriesPower consumptionAC 13 WCDModel Name Using Similar Mechanism CFD-S350Section CD Mechanism Type KSM-213CDPOptical Pick-up Name KSS-213CTC Model Name Using Similar Mechanism NEWSection Tape Transport Mechanism Type MF-S01– Continued on next page –