12Using optional equipmentAuxiliary audio equipmentBy connecting an optional portable audio deviceto the AUX input jack (stereo mini jack) on theunit and then simply selecting the source, youcan listen on your boat’s speakers. The volumelevel is adjustable for any difference between theunit and the portable audio device. Follow theprocedure below:Connecting the portable audiodevice1 Turn off the portable audio device.2 Turn down the volume on the unit.3 Connect to the unit.* Be sure to use a straight type plug.Adjust the volume levelBe sure to adjust the volume for each connectedaudio device before playback.1 Turn down the volume on the unit.2 Press (SOURCE) repeatedly until “AUX”appears.“FRONT IN” appears.3 Start playback of the portable audio device at amoderate volume.4 Set your usual listening volume on the unit.5 Press the select button repeatedly until “AUX”appears, and rotate the volume control dial toadjust the input level (–8 dB to +18 dB).Card remote commander RM-X114The corresponding buttons on the card remotecommander control the same functions as thoseon this unit.A.SCRL (Auto Scroll)To scroll long displayed item automaticallywhen the album/track is changed.– “A.SCRL-ON” (z): to scroll.– “A.SCRL-OFF”: to not scroll.LOCAL (Local Seek Mode)– “LOCAL-ON” : to only tune into stations withstronger signals.– “LOCAL-OFF” (z): to tune normal reception.MONO*3 (Monaural Mode)To improve poor FM reception, select monauralreception mode.– “MONO-ON” : to hear stereo broadcast inmonaural.– “MONO-OFF” (z): to hear stereo broadcast instereo.REG*1*3 (Regional)To set “REG-ON” (z) or “REG-OFF” (page 10).LPF*4 (Low Pass Filter)To select the subwoofer cut-off frequency: “LPFOFF” (z), “LPF125Hz” or “LPF 78Hz.”LOUD (Loudness)To allow you to listen clearly at low volumelevels.– “LOUD-ON” : to reinforce bass and treble.– “LOUD-OFF” (z): to not reinforce bass andtreble.BTM (page 8)*1 CDX-MR10 only*2 When the unit is turned off.*3 When FM is received.*4 When the audio output is set to “SUB.”AUXAUXConnecting cord*(not supplied)DISC –ATTOFFDSPL MODESOURCEDISC +VOL+–PRESET +SEEK +SEEK–PRESET –SOUNDENTERMENULISTMODELISTENTER*ATTDSPLMENU*SOURCE</,(SEEK –/+)SOUNDOFFVOL (+/–)m/M(DISC*/PRESET+/–)