Sony CDX-L300 Service Manual

Also see for CDX-L300 Installation/Connection: Comparison chart Service manual Operating instructions Specifications Installation/connections

Contents

1Model Name Using Similar Mechanism CDX-L250/L430XNEWCD Drive Mechanism Type MG-393X-121//KMG-393XA-121//KOptical Pick-up Name KSS-720ASERVICE MANUALUS ModelCanadian ModelCDX-L300E ModelCDX-L460XCDX-L300/L460XFM/AM COMPACT DISC PLAYERPhoto: CDX-L460X• The CD sections have no adjustments.AUDIO POWER SPECIFICATIONS (US Model)POWER OUTPUT AND TOTAL HARMONIC DISTORTION22 watts per channel minimum continuous average power into4 ohms, 4 channels driven from 20 Hz to 20 kHz with no morethan 5% total harmonic distortion.CD player sectionSignal-to-noise ratio 90 dBFrequency response 10 – 20,000 HzWow and flutter Below measurable limitLaser Diode Properties (CDX-L300)Material GaAlAsWavelength 780 nmEmission Duration ContinuousLaser output power Less than 44.6 μW** This output is the value measured at a distanceof 200 mm from the objective lens surface on theOptical Pick-up Block.Tuner sectionFMTuning range CDX-L300:87.5 – 107.9 MHzCDX-L460X:FM tuning interval:50 kHz/200 kHzswitchable87.5 – 108 MHz(at 50 kHz step)87.5 – 107.9 MHz(at 200 kHz step)Antenna terminal External antenna connectorIntermediate frequency 10.7 MHzUsable sensitivity 11 dBfSelectivity 75 dB at 400 kHzSignal-to-noise ratio 65 dB (stereo),68 dB (mono)SPECIFICATIONSHarmonic distortion at 1 kHz0.7% (stereo),0.5% (mono)Separation 33 dB at 1 kHzFrequency response 30 – 15,000 HzAMTuning range CDX-L300:530 – 1,710 kHzCDX-L460X:AM tuning interval:9 kHz/10 kHzswitchable531 – 1,602 kHz(at 9 kHz step)530 – 1,710 kHz(at 10 kHz step)Antenna terminal External antenna connectorIntermediate frequency 10.7 MHz/450 kHzSensitivity 30 μVPower amplifier sectionOutputs Speaker outputs(sure seal connectors)Speaker impedance 4 – 8 ohmsMaximum power output 45 W ⋅ 4 (at 4 ohms)– Continued on next page –Ver 1.3 2003. 089-873-402-042003H04-1© 2003. 08Sony Corporatione Vehicle CompanyPublished by Sony Engineering Corporation