Sony CDX-GT65UIW Operating Instructions Manual

Also see for CDX-GT65UIW: Limited warranty Specifications Installation/connections User manual

Contents

24Adjusting the listening positionYou can fine-tune the listening position setting.1 During reception/playback, press theselect button.2 Rotate the control dial until “ADJUSTPOS” appears, then press it.3 Rotate the control dial to adjust thelistening position, then press it.Adjustable range: “+3” – “CENTER” – “–3.”4 Press (BACK).The display returns to normal reception/playmode.DM+ AdvancedDM+ Advanced improves digitally compressedsound by restoring high frequencies lost in thecompression process.1 During playback, press the selectbutton.2 Rotate the control dial until “DM+”appears, then press it.3 Rotate the control dial to select “ON,”then press it.4 Press (BACK).The display returns to normal play mode.TipThe DM+ setting can be memorized for each source.Using rear speakers as subwoofer— Rear Bass EnhancerRear Bass Enhancer enhances the bass sound byapplying the low pass filter setting (page 25) tothe rear speakers. This function allows the rearspeakers to work as a subwoofer if one is notconnected.1 During reception/playback, press theselect button.2 Rotate the control dial until“REARBAS ENH” appears, then pressit.3 Rotate the control dial to select from“1,” “2” or “3,” then press it.4 Press (BACK).The display returns to normal reception/playmode.Adjusting setup items — SET1 Press and hold the select button.The setup display appears.2 Rotate the control dial until thedesired item appears, then press it.3 Rotate the control dial to select thesetting, then press it.*The setting is complete.4 Press (BACK).The display returns to normal reception/playmode.* For Custom Color setting, you need to takeadditional steps (page 20).NoteDisplayed items will differ, depending on the sourceand setting.The following items can be set (follow the pagereference for details):CLOCK ADJ (Clock Adjust) (page 6)CT (Clock Time)Activates the CT function: “ON,” “OFF”(page 11, 12).BEEPActivates the beep sound: “ON,” “OFF.”AUX-A*1 (AUX Audio)Activates the AUX source display: “ON,”“OFF” (page 25).AUTO OFFShuts off automatically after a desired timewhen the unit is turned off: “NO,” “30S(Seconds),” “30M (Minutes),” “60M (Minutes).”DEMO (Demonstration)Activates the demonstration: “ON,” “OFF.”DIMMERChanges the display brightness.– “AT”: to dim the display automatically whenyou turn lights on. (Available only when theillumination control lead is connected.)– “ON”: to dim the display.– “OFF”: deactivate the dimmer.CONTRASTAdjusts the contrast of the display. The contrastlevel is adjustable in 7 steps.COLOR (Preset Color)Selects the preset color of the display andbuttons on the main unit (page 20).CUSTOM COLR (Custom Color)Selects a preset color as a basis for furthercustomizing (page 20).SENSME COLR (SensMe Color)Changes the color according to the SensMechannels: “ON,” “OFF.”