Sony CDP-101 Service Manual

Also see for CDP-101 - Compact Disc Player: Limited warranty

CDP-101y“44 ;;{(i!\1-4. LOCATION AND FUCNTION OF CONTROLSBefore plugging in or attempting to operate this unit,it is suggested that you familiarize yourself with all its switches and controls and the purpose of each.Each number in the photo is keyed to the descriptive text.# OPEN/CLOSE button and indicator @Disc compartment @@ HEADPHONES jack@ HEADPHONES LEVEL control@ tmeR PLAY switch© owen switch@ @ OPEN/CLOSE button and indicatorWith one touch of this button the disc compartment opens for discloading. The indicator on the OPEN/CLOSE button will illuminatewhile the compartment is opening. With another touch the com-partment closes.@ Disc compartmentPlace a compact disc here.© POWER switchDepress to turn on the power. The ‘1” indicator will appear in thedisplay window in a few seconds. To turn the power off, press theswitch again.@ TIMER PLAY switchYou can set the player to play a disc at a predetermined time byconnecting any commercially available timer. To play, set thisswitch to ON. See “Timer-activated play” on page 19.@ HEADPHONES LEVEL contro!This control adjusts the volume at the headphones. At theminimum position, the sound is just audible.@ HEADPHONES jack (stereo phone jack)Accepts any low or high impedance stereo headphones.@ REPEAT programming buttonsPress these buttons to program repeat play of the disc.1 button: To repeat the selection now being played.To release repeat play, press the button again.ALL button: To repeat all the selections on the disc.To release repeat play, press the button again.Display windowREPEAT programming buttonsand indicators8) REMOTE SENSOR and indicator© LAPREMAINING TIME buttonAUTOMATIC MUSIC SENSORbuttons@® Manual search buttons@ & Pay button and indicator® ff PAUSE button and indicator@) RESET button~A+B button: To repeat play between specific points on the disc.With one touch of this button the built-in indicator flickers andthe point where the button has been pressed is memorized asthe ‘‘A” (start) point of repeat play.With another touch, the built-in indicator itluminates steadilyand the point where the button has been pressed a second timeis memorized as the ‘‘B” (end) point of repeat play.When the CLEAR button is pressed, this repeat play will becancelled.Any repeat program is also cancelled when another REPEAT pro-gramming button is pressed.© REMOTE SENSOR and indicator (for remote control)The infrared beam transmitted by the supplied Remote Commanderis received here. The indicator blinks to indicate that a faneeion keyof the Remote Commander has been pressed.@ LAP (elapsed)/REMAINING TIME buttonThe time counter normaily indicates elapsed time.When this button is pressed, the time counter will show the time re-maining before the end of the last selection, preceded by a minussign.When this button is pressed a second time, the time counter willagain become a normal time counter.@ AUTOMATIC MUSIC SENSOR buttonsK@@ (back selection) button: Press to go back to a previousselection.bP (forward selection) button:selection.@ Manual search buttonsKeep holding the appropriate button down to search for a particularpoint on the disc during either play or pause.You can monitor the disc sound reproduced in forward or in reverseat a high speed while searching during play.Press to skip ahead to a later