SERVICE MANUALSony Video & Sound Products Inc.9-896-479-012018B33-1© 2018.02C-100SPECIFICATIONSCONDENSER MICROPHONEUS ModelCanadian ModelAEP ModelUK ModelAustralian ModelChinese ModelVer. 1.0 2018.02GeneralType 2 Way Microphone (Condenser + Electret condenser)Power supply External power supply operation 44 V to 52 V DC (IEC* 61938 P48)Power consumption Less than 4.5 mAOutput connector XLR-3-12C TypeDimensions 40 mm dia. × 175 mm (1.57 in. dia. × 6.89 in.)Mass Approx. 290 g (10.2 oz)Supplied accessories Cradle suspension (1)Wind screen (1)Stand adaptor (W3/8 - NS5/8) (1)Carrying case (1)Operating instructions (1)Warranty card (1)PerformanceFrequency response 20 Hz - 50,000 HzDirectivity Uni-directional / Omni-directional / Bi-directional (switchable)Output impedance 90 Ω ±15%, balancedSensitivity -31 dB (Uni-directional)-37 dB (Omni-directional)-35 dB (Bi-directional)(deviation±3 dB)(0 dB=1 V/Pa, 1 kHz)Inherent noise Less than 19 dB SPL (Uni-directional)Less than 24 dB SPL (Omni-directional)Less than 22 dB SPL (Bi-directional)(0 dB=2 × 10-5 Pa)(IEC* 61672-1 A-Weighted, 1 kHz, 1 Pa)Maximum input sound pressure levelMore than 132 dB SPL (Uni-directional)More than 138 dB SPL (Omni-directional)More than 136 dB SPL (Bi-directional)(output level for 1% waveform distortion at 1 kHz, converted intoequivalent input sound pressure level: 0 dB=2 × 10-5 Pa)Dynamic range More than 113 dB (Uni-directional)More than 114 dB (Omni-directional)More than 114 dB (Bi-directional)PAD 0 dB/-10 dB (switchable)LOW CUT filter Flat/70 Hz (switchable)* IEC = International Electrotechnical CommissionDesign and specifications are subject to change without notice.