Sony BZMA-E555 Installation Manual

Chapter 3 Initial Setup3-3 Changing Settings 9To add an MAV to a workgroup1 On the [MAV] menu, click [Add New MAV].The Add New MAV dialog box appears.2 Specify the appropriate information in the following text boxes.[MAV Name]: The on-screen name of the MAV. This name can becomposed of a maximum of 8 alphanumeric characters,excluding spaces and tab marks.[IP Address]: The IP address of the MAV.[GbE transfer]: To make Gigabit Ethernet transfers possible, select thischeck box, and then specify the IP address of the computerused for Gigabit Ethernet transfers connected to the MAV.[Target]: To select the MAV as the target MAV, select this checkbox.3 When you are done, click [OK].The dialog box closes and the MAV is added to the workgroup.Target MAVIt is possible to control any MAV on the network with this program, but only oneat a time. The MAV selected to be the subject to BZMA-E555 control is calledthe “target MAV”. When adding an MAV, if [Target] is selected in the Add NewMAV dialog box, that MAV becomes the target MAV. You can change targetMAV whenever necessary.3-3 Changing SettingsAfter finishing initial setup and starting to use the BZMA-E555, it is possible tomodify settings or add new MAV to a workgroup, for example. For details referto the BZMA-E555 User’s Guide.Refer to the User’s Guide for details about the following:• Adding MAV to a workgroup• Modifying an MAV drive name• Selecting a different target MAV• Deleting an MAV from a workgroup

/ 11

Related manuals for Sony BZMA-E555