Sony BVM-E250 Operation Manual

Also see for BVM-E250: Specifications Operation guide Operation manual Manual

Contents

43Adjustment MenuChapter 3 MenuAdjustment MenuOverviewAdjusts the picture, color temperature, etc.When Adjustment is selected, the following menu isdisplayed. This menu is not selectable in the following cases:• When Side by Side is set to On• When Wipe is set to On• When Butterfly is set to On• When Blending is set to OnMenu Function and OperationiAdjustmentPicture Adj BColor Temp Adj BPosition Adj BNoteMenu Function and operation ([ ]: factory setting)Picture Adj Adjusts the chroma, phase, matrix and signal level automatically and contrast, brightness,chroma and phase to set the preset value to picture adjustment preset data.When the item is selected, the picture adjustment preset data to be set is displayed.To change the picture adjustment preset data to be adjusted, you can select from Preset1,Preset2, Preset3, Preset4, Preset5 and Preset (D-Cine) in the Picture Preset menu of theChannel Configuration menu (page 48).Auto Sets the automatic adjustment of chroma, phase, matrix and signal level.When the item is selected, the selected preset data is displayed.You can select this item when the composite or Y/C signal from the BKM-227W, or the analogcomponent or analog RGB signal from the BKM-229X is displayed.NoteThis menu is not selectable when the internal signal or captured frame is displayed.Auto Adjust Starts automatic adjustment. (It may take some time until the automatic adjustment iscompleted.)An external color-bar signal for the reference is necessary for automatic adjustment (page44).The chroma data is reset to the default setting [1000].The phase data is reset to the default setting [000].NoteWhen the analog component signal or analog RGB signal is input, adjust the picture positionin the Position Adj menu (page 47) to perform the automatic adjustment in the Auto Adjustmenu. When the picture position does not fit, the adjustment will not be performed correctlyand this may cause a malfunction.To cancel adjustmentPress the MENU button.