FeaturesGB 4FeaturesThe BRU-300/300P Optical Multiplex Unit is designedto connect the BRC-300/300P 3CCD Color VideoCamera.Long-distance transmission via optical fibercable (BRC-300/300P only)The BRU-300/300P is equipped with a cameraconnector to allow the connection of multiplex opticalfiber cable. You can connect the BRC-300/300P camerafrom up to 500 m (1,640 feet) away by inserting theBRBK-303 Optical Multiplex Card into the camera andusing the CCFC-M100 Optical Fiber Cable.Two interface card slots equippedThe BRU-300/300P is equipped as standard with acomposite video output (BNC) and S video output. Inaddition to these connectors, two interface card slotsallow the unit to be equipped with various analog signaloutputs such as RGB and component video outputs, andan SDI signal output conforming to SMPTE259 serialdigital interface standards.External sync signal input/output equippedWhen multiple BRC-300/300P cameras are connectedvia the Optical Fiber Cable, the video signal can besynchronized by inputting the video signal into theexternal sync input connector.Long-distance, high-speed transmission viaVISCA RS-232C/RS-422 communicationprotocolUp to seven VISCA-controllable cameras can beconnected in daisy chain.Connecting CablesUse the following connecting cable to connect devicesin this system.RS-232C cableExample of System ConfigurationCable Part No. NumberRS-232C cable(3m (10feet))1-590-879-3X 1EXT SYNC INIR SELECT751 2 3OFF ONIN VISCA RS-232C OUT!VISCA RS-4221 2 3 4 5 6 7 8 9DC IN12VRVIDEO S VIDEOto AC outletBRBK-303 OpticalMultiplex Card CCFC-M100 OpticalFiber CableVISCA RS-232C INto AC outletCAMERAto T VIDEO(or S VIDEO)75-ohm coaxialcable (or S-video cable)Video monitor, etc. RS-232C cable(Sony: 1-590-879-3X)(supplied with the RM-BR300)*VISCA RS-232CRM-BR300 Remote Control Unit to AC outlet* The VISCA RS-422 connection is also available if you use theVISCA RS-422 connectors.BRC-300/300PcameraBRU-300/300POptical MultiplexUnit (this unit)