Menu
Sony BRAVIA XBR-65X850B Manual
Also see for 49X850B: Operating instructions
                                                                                                                                                                                                                                                              |
i-Manual Print Font SizeBasic OperationsParts DescriptionWatching TVEnjoyingMovies/Music/PhotosUsing InternetServices andApplicationsWatching TV withFriends Far andNearUsing OtherDevicesUsing BRAVIASync DevicesUseful FunctionsConnecting to theInternetUsing HomeNetworkConfiguringVarious SettingsTroubleshootingHow to UseBookmarksTop Page > Troubleshooting > Network Connectivity Test ResultsNetwork Connectivity Test ResultsThe test results are “Failed”/“Failed”/“Failed”.The test results are “OK”/“Failed”/“Failed”.The test results are “OK”/“OK”/“Failed” or “OK”/“OK (IPv6 Only)”/“Failed”.The test results are “OK”/“OK (IPv6 Only)”/“OK (IPv6 Only)” or“OK”/“OK”/“OK (IPv6 Only)”.The test results are “Failed”/“Failed”/“Failed”.When using the wired LAN function, make sure that the cable is firmlyconnected.When using the wireless LAN function, unplug the TV from the AC power,wait for a while, then plug it in again.The test results are “OK”/“Failed”/“Failed”.The router function of your router may be turned off. Turn it on and tryagain.When using the wireless LAN function, check the items below:- If [Wireless Device on TV] is set to [Off], set [Built-in Wi-Fi] to [On].- An incorrect security (WPA or WEP) key may have been entered. Makesure that the correct security key is entered.- If you select a network (SSID) from the scan list, ensure that you select acorrect network (SSID). If you enter an SSID manually, make sure thatyou enter the correct SSID.- To find the correct security key and SSID, consult with the person whoset up your network or refer to the router’s instruction manual or website,or consult the router’s manufacturer.- If you configured the TV’s wireless LAN function to connect to a wirelessrouter (or access point) at 5GHz, the connection with the wireless router isdisconnected while [Wi-Fi Direct] is [On]. When you turn off [Wi-Fi Direct],the connection will automatically recover.223 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved