Sony BKNW-116 Installation Manual

Also see for BKNW-116: Maintenance manual Operation manual

1-8 (E) BKNW-116SCSI SCSISCSIBKNW-116 Hybrid recorderDisk array cable (1.5 m)Terminal connector1-7. How to Connect Hybrid Recorder1-7-2. Setting of Hybrid RecorderIt is required to change the setting of the hybrid recorder touse this unitRefer to the operation manual of the hybrid recorder forsetting.nIf the way of setting is not described in your operationmanual, contact your local Sony Sales Office/ServiceCenter.1-7. How to Connect Hybrid Recorder1-7-1. ConnectionPreparationsDisk array cable: 1-769-670-31(Supplied with this unit)SCSI terminal connector: 1-774-818-11(Supplied with hybrid recorder)Use the specified cable and connector. If not, the operationmay become unstable.ProceduresnTurn off the power before connecting.1. Disconnect the SCSI terminal connector from SCSIconnector of the hybrid recorder.2. As shown in the figure, connect this unit to the hybridrecorder with disk array cable.nFix the connector of the cable securely with two fixingscrews.3. Attach the SCSI terminal connector disconnected fromthe hybrid recorder to SCSI connector which is notconnecting the cable.nFix the terminal connector securely with two fixingscrews.