Sony BKMA-U70XGI Manual

1-2 (E) BKMA-U70XGI1-3. Installing TeraTermPro (Version 2.3)1. Copy the “Tools/ttermp23” folder and all the folders and files under it that are contained in the CD-ROM supplied, to TEMP or the desired folder of a personal computer.2. Click “setup.exe” in the “ttermp23” folder.TeraTermPro (version 2.3) is installed in a personal computer.3. Copy the “SY253data” folder in the “Tools/TeraTerm/” in the CD-ROM supplied, to the same folderwhere the TeraTermPro (version 2.3) is installed.nIn order to start up TeraTermPro (version 2.3), click “ttermpro.ex” in the “Ttermpro” folder.1-4. Downloading Parameters from the SY-253 Board1. Remove the ornamental panel (A) from the MAV-70.(Refer to Section 2-2-1 of the Maintenance Manual Volume 1.)2. Set the switch S3 on the front panel of the MAV-70 to INT.3. Connect the MAV-70 to a personal computer with the RS-232C cross cable.4. Turn on the main power of the MAV-70.5. Start up TeraTermPro (version 2.3).6. The Tera Term New connection display appears. Click “serial” and press the [OK] button.1-3. Installing TeraTermPro (Version 2.3)1-4. Downloading Parameters from the SY-253 BoardCOM1 RS-232C cable (9P-9P)Personal Computer