Sony BKM-FW50 Service Manual

Also see for BKM-FW50: Brochure & specs Specifications Operating instructions Installation manual Specifications

2-5BKM-FW50PCOPTION1 slot(Install in VIDEO/COM)BKM-FW50EthernetcableEthernetcableMonitor(FWD-40LX1/42PV1/50PX2 etc.)RouternConnect the Ethernet cable to the LAN side of the router.Never connect it to the WAN side.2-3. Preparation2-3-1. Required Equipment. Monitor (FWD-32LX1R/40LX1/40LX2/40PX2/50PX2 etc.). This unit (BKM-FW50). Personal computer (hereafter referred to as PC). BKM-FW50 version update firmwareIn the case of Network Managementbootloader.rom: boot file (usually not used)image debug.rom: Network Management application fileupdater.rom: Updater fileIn the case of Streaming ControllervxWorks.rom: Streaming Controller application file. BKM-FW50 firmware writing software:Firmware Update.exenThe file name may be changed depending on thefirmware version.Use the latest version of Firmware Updater.. Router. Ethernet cable (2 pcs)2-3-2. Connection2-4. Version UpdatemObserve the following items in the version update.. Do not turn off the power of the monitor and routerduring the version update.. Do not use bootloader.rom unless it is required.. In the mode of Network Management, do not use the fileother than “Network Management”.. In the mode of Streaming Controller, do not use the fileother than “Streaming Controller”.2-4-1. IP Address AcquisitionIn order to access via the Web browser, acquire the IPaddress of this unit in the following procedure.1. Turn on the power of the monitor.2. Press the [Menu] button of the monitor or remotecontroller.3. Select “Initial setting/Information” using the [(] and[)] buttons and push the [Enter] button.4. Select “Information” using the [(] and [)] buttons andpush the [Enter] button.The IP address is displayed on OSD.